Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
S-80132ANPF-JCRTFU

S-80132ANPF-JCRTFU

Product Overview

Category

The S-80132ANPF-JCRTFU belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

The S-80132ANPF-JCRTFU is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to regulate and manage voltage effectively, ensuring stable and reliable power supply to electronic devices.

Packaging/Quantity

The S-80132ANPF-JCRTFU is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.0V - 5.5V
  • Maximum Output Current: 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80132ANPF-JCRTFU has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. CE (Chip Enable)

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Low dropout voltage
  • Short-circuit protection
  • Soft start function

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power loss
  • Compact size allows for easy integration into various electronic devices
  • Wide input and output voltage ranges provide flexibility in application
  • Comprehensive protection features enhance device reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The S-80132ANPF-JCRTFU operates based on a voltage regulation principle. It takes an input voltage within the specified range and regulates it to provide a stable output voltage. The IC incorporates various protection mechanisms to ensure safe operation and prevent damage to connected devices.

Detailed Application Field Plans

The S-80132ANPF-JCRTFU finds application in a wide range of electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-80132BNPF-JCRTFU
  2. S-80132CNPF-JCRTFU
  3. S-80132DNPF-JCRTFU
  4. S-80132ENPF-JCRTFU

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, the S-80132ANPF-JCRTFU is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, high efficiency, and comprehensive protection features make it a reliable choice for various applications. However, designers should consider its limitations in terms of maximum output current and operating temperature range when selecting this IC for specific projects.

Перечислите 10 распространенных вопросов и ответов, связанных с применением S-80132ANPF-JCRTFU в технических решениях.

Sure! Here are 10 common questions and answers related to the application of S-80132ANPF-JCRTFU in technical solutions:

1. What is S-80132ANPF-JCRTFU? - S-80132ANPF-JCRTFU is a specific model of integrated circuit (IC) used for voltage detection and reset functions in various technical applications.

2. What is the typical operating voltage range for S-80132ANPF-JCRTFU? - The typical operating voltage range for S-80132ANPF-JCRTFU is between 1.6V and 6.0V.

3. What is the purpose of using S-80132ANPF-JCRTFU in technical solutions? - S-80132ANPF-JCRTFU is commonly used to monitor the power supply voltage and generate a reset signal when the voltage falls below a certain threshold, ensuring stable operation of the system.

4. Can S-80132ANPF-JCRTFU be used in battery-powered devices? - Yes, S-80132ANPF-JCRTFU can be used in battery-powered devices as it operates within a wide voltage range and consumes low power.

5. How does S-80132ANPF-JCRTFU detect the voltage level? - S-80132ANPF-JCRTFU uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold, triggering the reset signal when the voltage drops below the threshold.

6. Is S-80132ANPF-JCRTFU suitable for automotive applications? - Yes, S-80132ANPF-JCRTFU is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

7. Can S-80132ANPF-JCRTFU be used in industrial control systems? - Absolutely, S-80132ANPF-JCRTFU is commonly used in industrial control systems to ensure reliable operation by monitoring the power supply voltage.

8. Does S-80132ANPF-JCRTFU have any built-in protection features? - Yes, S-80132ANPF-JCRTFU has built-in overvoltage protection and hysteresis to prevent false triggering of the reset signal.

9. What is the typical response time of S-80132ANPF-JCRTFU? - The typical response time of S-80132ANPF-JCRTFU is around a few microseconds, ensuring quick detection and response to voltage fluctuations.

10. Can multiple S-80132ANPF-JCRTFU ICs be used in parallel for redundancy? - Yes, multiple S-80132ANPF-JCRTFU ICs can be used in parallel to provide redundancy and enhance the reliability of the voltage detection and reset function in critical applications.

Please note that these answers are general and may vary depending on the specific requirements and application scenarios.