Подробную информацию о продукте см. в характеристиках.
TSL260RD-TR
Introduction
The TSL260RD-TR is a light-to-voltage optical sensor designed for various applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Product Overview
Category
The TSL260RD-TR belongs to the category of optical sensors.
Use
It is used to convert light intensity to a proportional voltage output.
Characteristics
- High sensitivity
- Wide dynamic range
- Low power consumption
- Compact size
Package
The TSL260RD-TR is available in a small surface-mount package.
Essence
The essence of this product lies in its ability to accurately measure light intensity and convert it into a usable electrical signal.
Packaging/Quantity
The TSL260RD-TR is typically packaged in reels with a specific quantity per reel.
Specifications
- Operating Voltage: 2.7V to 3.6V
- Output Voltage Range: 0V to VCC
- Spectral Response Range: 300nm to 1100nm
- Dark Current: 1nA (typical)
- Rise Time: 4ms (typical)
- Fall Time: 4ms (typical)
Detailed Pin Configuration
The TSL260RD-TR has a standard pin configuration with connections for power supply, ground, and output.
| Pin Name | Description | |----------|-----------------| | VCC | Power Supply | | GND | Ground | | OUT | Output Voltage |
Functional Features
- Linear response to light intensity
- Low noise output
- Built-in photodiode and transimpedance amplifier
Advantages and Disadvantages
Advantages
- High sensitivity allows for accurate light measurement
- Wide dynamic range enables use in various lighting conditions
- Low power consumption prolongs battery life in portable devices
Disadvantages
- Susceptible to ambient light interference
- Limited spectral response range compared to some alternatives
Working Principles
The TSL260RD-TR operates based on the principle of converting incident light into a corresponding voltage output using a photodiode and transimpedance amplifier. The output voltage is directly proportional to the light intensity falling on the sensor.
Detailed Application Field Plans
The TSL260RD-TR is suitable for a wide range of applications, including: - Ambient light sensing in display devices - Industrial automation for light level monitoring - Portable electronics for automatic screen brightness adjustment - Medical devices for non-invasive light sensing
Detailed and Complete Alternative Models
Some alternative models to the TSL260RD-TR include: - TSL250RD-TR: Similar functionality with a different spectral response range - TSL230R-LF: Lower power consumption with comparable sensitivity - TSL3301-LF: Higher spectral response range for specialized applications
In conclusion, the TSL260RD-TR offers high sensitivity and a wide dynamic range, making it suitable for diverse light sensing applications. However, its susceptibility to ambient light interference and limited spectral response range should be considered when selecting a sensor for specific use cases.
[Word Count: 464]
Перечислите 10 распространенных вопросов и ответов, связанных с применением TSL260RD-TR в технических решениях.
What is the TSL260RD-TR sensor used for?
- The TSL260RD-TR sensor is commonly used for ambient light sensing in various technical solutions.
What is the operating voltage range of the TSL260RD-TR sensor?
- The operating voltage range of the TSL260RD-TR sensor is typically between 2.7V and 3.6V.
How does the TSL260RD-TR sensor communicate with microcontrollers or other devices?
- The TSL260RD-TR sensor typically communicates using an I2C interface, making it compatible with a wide range of microcontrollers and devices.
What is the spectral response of the TSL260RD-TR sensor?
- The TSL260RD-TR sensor has a spectral response that closely matches the human eye's response to light, making it suitable for various lighting applications.
Can the TSL260RD-TR sensor be used in outdoor environments?
- Yes, the TSL260RD-TR sensor can be used in outdoor environments, but proper protection from environmental factors such as moisture and direct sunlight may be required.
What is the typical resolution of the TSL260RD-TR sensor?
- The TSL260RD-TR sensor typically has a resolution of 16 bits, providing accurate light intensity measurements.
Does the TSL260RD-TR sensor have built-in ambient light rejection capabilities?
- Yes, the TSL260RD-TR sensor is designed to reject unwanted infrared light, improving its accuracy in measuring ambient light levels.
What are the typical applications of the TSL260RD-TR sensor?
- The TSL260RD-TR sensor is commonly used in display backlight control, automatic brightness adjustment in consumer electronics, and ambient light monitoring in industrial and automotive applications.
Is the TSL260RD-TR sensor sensitive to flickering light sources?
- The TSL260RD-TR sensor is designed to minimize the effects of flickering light sources, providing stable and reliable light intensity measurements.
Can the TSL260RD-TR sensor be calibrated for specific light intensity ranges?
- Yes, the TSL260RD-TR sensor can be calibrated to accommodate specific light intensity ranges, allowing for customization in different technical solutions.