Central Semiconductor Corp
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
2N3716
Посмотреть детали Таблицы данных

2N3716 Transistor

Product Overview

The 2N3716 is a silicon NPN power transistor that belongs to the category of discrete semiconductor devices. It is commonly used in electronic circuits for amplification and switching applications due to its high current and voltage capabilities. The transistor exhibits characteristics such as high power dissipation, low saturation voltage, and fast switching speed. It is typically packaged in a TO-66 metal can package and is available in various packaging quantities.

Specifications

  • Maximum Collector-Emitter Voltage: 100V
  • Maximum Collector Current: 10A
  • Power Dissipation: 100W
  • Transition Frequency: 2 MHz
  • Operating Temperature Range: -65°C to 200°C

Pin Configuration

The 2N3716 transistor has a standard TO-66 metal can package with three leads: 1. Base (B) 2. Emitter (E) 3. Collector (C)

Functional Features

The transistor offers high power amplification and switching capabilities, making it suitable for use in audio amplifiers, power supplies, and motor control circuits. Its low saturation voltage ensures minimal power loss during operation.

Advantages and Disadvantages

Advantages

  • High power dissipation
  • Low saturation voltage
  • Fast switching speed

Disadvantages

  • Relatively large package size
  • Limited operating temperature range

Working Principles

When used as an amplifier, the 2N3716 operates by controlling the flow of current between the collector and emitter terminals based on the input signal applied to the base terminal. In switching applications, it rapidly transitions between cutoff and saturation states to control the flow of current through a load.

Application Field Plans

The 2N3716 transistor finds extensive use in various applications, including: - Audio amplifiers - Power supply units - Motor control circuits - Voltage regulators

Alternative Models

For users seeking alternatives to the 2N3716, several comparable transistors are available, including: - 2N3055 - MJ15003 - TIP31

In conclusion, the 2N3716 transistor is a versatile component with high power handling capabilities, making it well-suited for a wide range of amplification and switching applications.

[Word Count: 278]

Перечислите 10 распространенных вопросов и ответов, связанных с применением 2N3716 в технических решениях.

  1. What is the 2N3716 transistor used for?

    • The 2N3716 is a general-purpose NPN bipolar junction transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the typical operating conditions for the 2N3716?

    • The 2N3716 operates with a maximum collector current of 500mA, a maximum collector-emitter voltage of 30V, and a maximum power dissipation of 625mW.

  3. How do I determine the pinout of the 2N3716 transistor?

    • The pinout of the 2N3716 is typically identified as the emitter (E), base (B), and collector (C) leads. When viewing the flat side of the transistor with the pins down, the left lead is the emitter, the middle lead is the base, and the right lead is the collector.

  4. Can the 2N3716 be used for audio amplification?

    • Yes, the 2N3716 can be used for small-signal audio amplification due to its low noise and high gain characteristics.

  5. What are some common circuit configurations using the 2N3716?

    • Common circuit configurations include common emitter amplifiers, switch circuits, and signal amplification stages in electronic devices.

  6. What are the typical gain characteristics of the 2N3716?

    • The 2N3716 has a typical DC current gain (hFE) ranging from 100 to 300 at a collector current of 10mA.

  7. What are the temperature limitations of the 2N3716?

    • The 2N3716 is typically rated for operation within a temperature range of -65°C to 200°C.

  8. Can the 2N3716 be used in high-frequency applications?

    • While the 2N3716 can be used in moderate frequency applications, it may not be suitable for very high-frequency applications due to its transition frequency limitations.

  9. Are there any common failure modes associated with the 2N3716?

    • Common failure modes include thermal runaway under excessive power dissipation and breakdown due to overvoltage conditions.

  10. Where can I find detailed specifications and application notes for the 2N3716?

    • Detailed specifications and application notes for the 2N3716 can be found in the manufacturer's datasheet and technical documentation, as well as in various electronics reference books and online resources.