Cypress Semiconductor Corp
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
MB96F348RSBPMC-GSE2
Посмотреть детали Таблицы данных

MB96F348RSBPMC-GSE2

Product Overview

Category: Microcontroller
Use: Embedded systems, IoT devices
Characteristics: High-performance, low-power consumption
Package: LQFP-64
Essence: Advanced microcontroller for various applications
Packaging/Quantity: Tray packaging, 250 units per tray

Specifications

  • Architecture: 16-bit RISC
  • CPU Speed: Up to 32 MHz
  • Flash Memory: 256 KB
  • RAM: 16 KB
  • Operating Voltage: 2.7V - 5.5V
  • I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 4
  • ADC Channels: 8
  • PWM Channels: 6
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB96F348RSBPMC-GSE2 microcontroller has a total of 64 pins in the LQFP package. The pin configuration is as follows:

  1. VDD
  2. P00
  3. P01
  4. P02
  5. P03
  6. P04
  7. P05
  8. P06
  9. P07
  10. P10
  11. P11
  12. P12
  13. P13
  14. P14
  15. P15
  16. P16
  17. P17
  18. P20
  19. P21
  20. P22
  21. P23
  22. P24
  23. P25
  24. P26
  25. P27
  26. P30
  27. P31
  28. P32
  29. P33
  30. P34
  31. P35
  32. P36
  33. P37
  34. P40
  35. P41
  36. P42
  37. P43
  38. P44
  39. P45
  40. P46
  41. P47
  42. P50
  43. P51
  44. P52
  45. P53
  46. P54
  47. P55
  48. P56
  49. P57
  50. RESET
  51. XT1
  52. XT2
  53. VSS
  54. AVDD
  55. AIN0
  56. AIN1
  57. AIN2
  58. AIN3
  59. AIN4
  60. AIN5
  61. AIN6
  62. AIN7
  63. VREF
  64. VSS

Functional Features

  • High-performance 16-bit RISC architecture
  • Low-power consumption for energy-efficient applications
  • Ample flash memory and RAM for data storage and processing
  • Multiple communication interfaces for seamless connectivity
  • Timers/counters and PWM channels for precise timing and control
  • ADC channels for analog signal acquisition
  • Wide operating temperature range for versatile environments

Advantages and Disadvantages

Advantages: - High-performance capabilities - Low-power consumption for energy efficiency - Ample memory for data storage - Versatile communication interfaces - Precise timing and control features - Suitable for various application fields

Disadvantages: - Limited number of I/O pins - Relatively small package size

Working Principles

The MB96F348RSBPMC-GSE2 microcontroller operates based on a 16-bit RISC architecture. It executes instructions stored in its flash memory to perform various tasks. The CPU speed of up to 32 MHz ensures efficient processing, while the low-power consumption enables extended battery life in portable devices. The microcontroller's I/O pins allow for interaction with external components, and the communication interfaces facilitate seamless connectivity with other devices.

Detailed Application Field Plans

The MB96F348RSBPMC-GSE2 microcontroller is suitable for a wide range of application fields, including but not limited to: - Industrial automation - Home automation - Automotive electronics - Consumer electronics - Internet of Things (IoT) devices - Medical devices

Detailed and Complete Alternative Models

  1. MB96F348RSBPMC-GSE1: Similar to MB96F348RSBPMC-GSE2, but with different pin configuration.
  2. MB96F348RSBPMC-GSE3: Upgraded version with higher CPU speed and increased memory capacity.
  3. MB96F348RSBPMC-GSE4: Lower-cost variant with reduced features and memory capacity.

These alternative models provide options based on specific requirements and budget considerations.

Word count: 425 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением MB96F348RSBPMC-GSE2 в технических решениях.

Sure! Here are 10 common questions and answers related to the application of MB96F348RSBPMC-GSE2 in technical solutions:

  1. Q: What is MB96F348RSBPMC-GSE2? A: MB96F348RSBPMC-GSE2 is a microcontroller unit (MCU) developed by Fujitsu. It is designed for use in various technical solutions.

  2. Q: What are the key features of MB96F348RSBPMC-GSE2? A: Some key features of MB96F348RSBPMC-GSE2 include a high-performance 16-bit CPU, on-chip flash memory, multiple communication interfaces, and various peripherals.

  3. Q: What technical solutions can MB96F348RSBPMC-GSE2 be used for? A: MB96F348RSBPMC-GSE2 can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and more.

  4. Q: How much flash memory does MB96F348RSBPMC-GSE2 have? A: MB96F348RSBPMC-GSE2 has a built-in flash memory with a capacity of XX kilobytes (KB).

  5. Q: Can MB96F348RSBPMC-GSE2 support real-time operating systems (RTOS)? A: Yes, MB96F348RSBPMC-GSE2 is capable of running real-time operating systems, making it suitable for complex applications that require multitasking capabilities.

  6. Q: What communication interfaces are available on MB96F348RSBPMC-GSE2? A: MB96F348RSBPMC-GSE2 provides multiple communication interfaces, including UART, SPI, I2C, and CAN, allowing seamless integration with other devices.

  7. Q: Does MB96F348RSBPMC-GSE2 support analog-to-digital conversion (ADC)? A: Yes, MB96F348RSBPMC-GSE2 features an on-chip ADC module, enabling it to interface with analog sensors and convert analog signals into digital data.

  8. Q: Can MB96F348RSBPMC-GSE2 operate in harsh environments? A: Yes, MB96F348RSBPMC-GSE2 is designed to withstand harsh operating conditions, including wide temperature ranges and high levels of vibration.

  9. Q: Is there any development toolchain available for programming MB96F348RSBPMC-GSE2? A: Yes, Fujitsu provides a comprehensive development toolchain, including an integrated development environment (IDE) and debugging tools, to facilitate software development for MB96F348RSBPMC-GSE2.

  10. Q: Where can I find more information about MB96F348RSBPMC-GSE2? A: You can refer to the official documentation provided by Fujitsu or visit their website for detailed technical specifications, application notes, and other resources related to MB96F348RSBPMC-GSE2.