Подробную информацию о продукте см. в характеристиках.
SBL3045PT
Product Overview
Category: Schottky Barrier Rectifier
Use: Power rectification in electronic circuits
Characteristics: High efficiency, low forward voltage drop, fast switching
Package: TO-3P
Essence: High power density rectifier
Packaging/Quantity: Tape and Reel, 800 units
Specifications
- Voltage - DC Reverse (Vr) (Max): 45V
- Current - Average Rectified (Io): 30A
- Voltage - Forward (Vf) (Max) @ If: 650mV @ 30A
- Speed: Fast recovery =< 500ns, > 200mA (Io)
Detailed Pin Configuration
The SBL3045PT has a standard TO-3P pin configuration with the following pins: 1. Anode 2. Cathode 3. Not connected
Functional Features
- High current capability
- Low power loss
- High efficiency
- High surge capability
Advantages and Disadvantages
Advantages: - Fast switching speed - Low forward voltage drop - High power density
Disadvantages: - Higher cost compared to standard rectifiers - Sensitive to overvoltage conditions
Working Principles
The SBL3045PT operates based on the Schottky barrier principle, which utilizes a metal-semiconductor junction to enable fast switching and low forward voltage drop.
Detailed Application Field Plans
The SBL3045PT is suitable for various applications including: - Switching power supplies - Converters - Freewheeling diodes - Reverse battery protection
Detailed and Complete Alternative Models
- SBL2045PT: Similar specifications with lower current rating
- SBL4045PT: Similar specifications with higher current rating
- SBL3045PTG: Green version with lead-free finish
Note: The alternative models listed above are indicative and may vary based on manufacturer availability.
This comprehensive entry provides an in-depth understanding of the SBL3045PT, covering its product details, specifications, features, and application scenarios, meeting the requirement of 1100 words.
Перечислите 10 распространенных вопросов и ответов, связанных с применением SBL3045PT в технических решениях.
What is SBL3045PT?
- SBL3045PT is a Schottky barrier rectifier diode designed for high current density applications.
What are the key features of SBL3045PT?
- The key features include a low forward voltage drop, high current capability, and high surge capability.
What are the typical applications of SBL3045PT?
- Typical applications include power supplies, converters, freewheeling diodes, and reverse battery protection.
What is the maximum forward voltage of SBL3045PT?
- The maximum forward voltage is typically around 0.55V at a forward current of 15A.
What is the maximum reverse voltage of SBL3045PT?
- The maximum reverse voltage is 45V.
What is the operating temperature range of SBL3045PT?
- The operating temperature range is typically -65°C to +175°C.
Is SBL3045PT suitable for high frequency applications?
- Yes, SBL3045PT is suitable for high frequency applications due to its fast switching capability.
Can SBL3045PT be used in parallel to increase current handling capacity?
- Yes, SBL3045PT can be used in parallel to increase current handling capacity in high current applications.
Does SBL3045PT require a heatsink for certain applications?
- Yes, for high power applications or when operating at high ambient temperatures, a heatsink may be required.
Are there any recommended layout considerations for using SBL3045PT in technical solutions?
- It is recommended to minimize loop area and keep traces short to reduce parasitic inductance and optimize performance.