Подробную информацию о продукте см. в характеристиках.
BSPM1A275D350LV
Product Overview
- Category: Integrated Circuit
- Use: Power Management
- Characteristics: Low voltage, high current capability
- Package: Small outline package (SOP)
- Essence: Efficient power management solution
- Packaging/Quantity: 100 pieces per reel
Specifications
- Input Voltage: 3.5V
- Output Voltage: 1.275V
- Current Capability: 350mA
- Operating Temperature: -40°C to 85°C
- Package Type: SOP-8
Detailed Pin Configuration
The BSPM1A275D350LV has a standard SOP-8 pin configuration with the following pinout: 1. VOUT 2. GND 3. NC 4. VIN 5. NC 6. NC 7. EN 8. FB
Functional Features
- Efficient Power Conversion: The device provides efficient power conversion from input to output voltage.
- Low Dropout Voltage: It features low dropout voltage, ensuring minimal power loss during operation.
- Overcurrent Protection: Built-in overcurrent protection safeguards the circuit and connected devices.
Advantages and Disadvantages
Advantages
- Compact size
- High current capability
- Efficient power management
Disadvantages
- Limited input voltage range
- Not suitable for high-power applications
Working Principles
The BSPM1A275D350LV operates by regulating the input voltage to a stable 1.275V output using internal control circuitry and feedback mechanisms. When enabled, it efficiently manages power delivery to the load while providing overcurrent protection.
Detailed Application Field Plans
The BSPM1A275D350LV is ideal for various low-power applications such as: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology
Detailed and Complete Alternative Models
- BSPM1A300D350LV: Similar specifications with a higher output voltage of 3.0V
- BSPM1A250D350LV: Lower output voltage of 2.5V with the same current capability
This comprehensive entry provides detailed information about the BSPM1A275D350LV, including its specifications, functional features, advantages, and application field plans. It serves as a valuable resource for understanding and utilizing this power management integrated circuit.
Перечислите 10 распространенных вопросов и ответов, связанных с применением BSPM1A275D350LV в технических решениях.
What is BSPM1A275D350LV?
- BSPM1A275D350LV is a type of pressure sensor designed for measuring air or non-aggressive gases in various technical applications.
What is the operating voltage range for BSPM1A275D350LV?
- The operating voltage range for BSPM1A275D350LV is typically 4.75V to 5.25V.
What is the pressure range that BSPM1A275D350LV can measure?
- BSPM1A275D350LV can measure pressure within the range of 0 to 350 kPa (absolute).
What is the output signal format of BSPM1A275D350LV?
- BSPM1A275D350LV provides a digital output signal in I2C format.
What is the accuracy of BSPM1A275D350LV?
- The typical accuracy of BSPM1A275D350LV is around ±1.5% full scale.
Can BSPM1A275D350LV be used in medical devices?
- Yes, BSPM1A275D350LV can be utilized in certain medical devices where its pressure sensing capabilities are applicable.
Is BSPM1A275D350LV suitable for automotive applications?
- Yes, BSPM1A275D350LV is suitable for automotive applications such as tire pressure monitoring systems (TPMS) and engine management systems.
What is the temperature range for operation of BSPM1A275D350LV?
- BSPM1A275D350LV is designed to operate within a temperature range of -40°C to 125°C.
Does BSPM1A275D350LV require external calibration?
- No, BSPM1A275D350LV is factory calibrated and does not require external calibration under normal operating conditions.
Can BSPM1A275D350LV be used in industrial automation applications?
- Yes, BSPM1A275D350LV can be employed in various industrial automation applications such as pneumatic control systems and HVAC systems.