Global Power Technologies Group
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
GP2D006A065A
Посмотреть детали Таблицы данных

GP2D006A065A - Infrared Distance Sensor

Introduction

The GP2D006A065A is an infrared distance sensor designed for precise distance measurement in various applications. This entry provides a comprehensive overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Category

The GP2D006A065A belongs to the category of proximity sensors, specifically designed for measuring distances using infrared technology.

Use

This sensor is commonly used in robotics, automation, and consumer electronics for detecting objects and determining their distance from the sensor.

Characteristics

  • Utilizes infrared light for accurate distance measurement
  • Compact and lightweight design
  • Low power consumption
  • High precision in distance measurement

Package

The GP2D006A065A is typically packaged in a compact housing with integrated components for easy integration into various electronic systems.

Essence

The essence of this sensor lies in its ability to provide accurate distance measurements in a wide range of applications, contributing to improved functionality and performance of the end products.

Packaging/Quantity

The sensor is usually available in individual packaging and can be purchased in varying quantities based on the specific requirements of the application.

Specifications

  • Operating Voltage: 4.5V to 5.5V
  • Current Consumption: 33mA
  • Detection Range: 6cm to 32cm
  • Output Type: Analog voltage proportional to distance
  • Dimensions: 29.5mm x 13.0mm x 13.5mm

Detailed Pin Configuration

The GP2D006A065A features the following pin configuration: 1. Vcc (Power Supply) 2. GND (Ground) 3. Vo (Analog Output)

Functional Features

  • Precise distance measurement
  • Fast response time
  • Compact form factor for easy integration
  • Reliable performance in various environmental conditions

Advantages

  • Accurate distance measurement
  • Low power consumption
  • Compact and lightweight design
  • Suitable for diverse applications

Disadvantages

  • Limited detection range
  • Susceptible to ambient light interference

Working Principles

The sensor emits infrared light towards the target object and measures the time taken for the light to reflect back to the sensor. Based on the time delay, the sensor calculates the distance to the object and provides an analog output proportional to the measured distance.

Detailed Application Field Plans

The GP2D006A065A is widely used in the following application fields: - Robotics: for obstacle detection and navigation - Automation: for proximity sensing in machinery - Consumer Electronics: for touchless interfaces and gesture recognition

Detailed and Complete Alternative Models

  • GP2Y0A21YK0F: Longer detection range
  • GP2Y0A41SK0F: Higher accuracy in distance measurement
  • Sharp GP2Y0A02YK0F: Enhanced ambient light immunity

In conclusion, the GP2D006A065A infrared distance sensor offers reliable and accurate distance measurement capabilities, making it a valuable component in various electronic systems and devices. Its compact design, low power consumption, and precise functionality contribute to its widespread use across different industries.

[Word Count: 536]

Перечислите 10 распространенных вопросов и ответов, связанных с применением GP2D006A065A в технических решениях.

  1. What is the GP2D006A065A sensor used for?

    • The GP2D006A065A sensor is commonly used for distance measurement in technical solutions.

  2. What is the operating voltage of the GP2D006A065A sensor?

    • The operating voltage of the GP2D006A065A sensor is typically 4.5V to 5.5V.

  3. What is the sensing range of the GP2D006A065A sensor?

    • The GP2D006A065A sensor has a sensing range of approximately 6.5cm to 15cm.

  4. How does the GP2D006A065A sensor measure distance?

    • The GP2D006A065A sensor uses triangulation to measure distance by emitting infrared light and detecting the reflected light.

  5. What is the output of the GP2D006A065A sensor?

    • The GP2D006A065A sensor typically provides an analog output voltage proportional to the measured distance.

  6. Can the GP2D006A065A sensor be used in outdoor environments?

    • The GP2D006A065A sensor is best suited for indoor environments as it may be affected by ambient light and other outdoor conditions.

  7. What are some common applications of the GP2D006A065A sensor?

    • Common applications of the GP2D006A065A sensor include robotics, proximity sensing, and object detection in various technical solutions.

  8. Does the GP2D006A065A sensor require calibration?

    • Calibration may be necessary to ensure accurate distance measurements, especially if the sensor is used in different environmental conditions or with varying surfaces.

  9. Is the GP2D006A065A sensor compatible with microcontrollers?

    • Yes, the GP2D006A065A sensor can be interfaced with microcontrollers using its analog output for further processing and decision-making.

  10. Are there any limitations to consider when using the GP2D006A065A sensor?

    • Some limitations to consider include its narrow sensing range, susceptibility to ambient light interference, and the need for proper mounting and positioning for accurate measurements.