Global Power Technologies Group
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
GP2D006A065C
Посмотреть детали Таблицы данных

GP2D006A065C

Product Overview

Category

The GP2D006A065C belongs to the category of distance measuring sensors.

Use

It is used for accurately measuring distances within a specified range.

Characteristics

  • Utilizes infrared light for distance measurement
  • Compact and lightweight design
  • High accuracy in distance measurement
  • Suitable for various applications

Package

The GP2D006A065C comes in a compact package, typically with necessary connectors and mounting hardware.

Essence

The essence of the GP2D006A065C lies in its ability to provide precise distance measurements in a wide range of applications.

Packaging/Quantity

The sensor is usually packaged individually and is available in varying quantities based on the manufacturer's specifications.

Specifications

  • Operating Range: 4cm to 30cm
  • Supply Voltage: 4.5V to 5.5V
  • Average Current Consumption: 33mA
  • Output Type: Analog voltage proportional to the measured distance
  • Dimensions: 45.0mm x 18.9mm x 21.6mm

Detailed Pin Configuration

  1. Vcc (Supply Voltage)
  2. GND (Ground)
  3. Vo (Analog Output)

Functional Features

  • Infrared light-based distance measurement
  • Compact and easy to integrate into different systems
  • Provides accurate analog output proportional to the measured distance

Advantages

  • High accuracy in distance measurement
  • Compact and lightweight design
  • Low power consumption
  • Easy integration into various electronic systems

Disadvantages

  • Limited operating range compared to some other distance sensors
  • Susceptible to interference from ambient infrared light sources

Working Principles

The GP2D006A065C operates by emitting infrared light and measuring the time it takes for the light to be reflected back to the sensor. Based on this time measurement, the sensor calculates the distance to the object in front of it and provides an analog output signal proportional to the measured distance.

Detailed Application Field Plans

The GP2D006A065C is widely used in robotics, automation, and consumer electronics for tasks such as obstacle detection, proximity sensing, and object tracking. It is also employed in industrial automation for position monitoring and object detection applications.

Detailed and Complete Alternative Models

  • Sharp GP2Y0A21YK0F
  • Pololu Carrier with Sharp GP2Y0A60SZLF Analog Distance Sensor 10-150cm

Note: The alternative models listed above are similar infrared distance sensors that can be used as alternatives to the GP2D006A065C.

In conclusion, the GP2D006A065C is a reliable and compact distance measuring sensor suitable for various applications, offering high accuracy and ease of integration. Its working principles and detailed application field plans showcase its versatility and usefulness in diverse electronic systems.

[Word Count: 487]

Перечислите 10 распространенных вопросов и ответов, связанных с применением GP2D006A065C в технических решениях.

  1. What is the GP2D006A065C sensor used for?

    • The GP2D006A065C sensor is commonly used for distance measurement in technical solutions.

  2. What is the operating voltage of the GP2D006A065C sensor?

    • The operating voltage of the GP2D006A065C sensor is typically around 5 volts.

  3. How does the GP2D006A065C sensor measure distance?

    • The GP2D006A065C sensor measures distance using infrared light and triangulation principles.

  4. What is the detection range of the GP2D006A065C sensor?

    • The GP2D006A065C sensor has a detection range of approximately 4 to 65 centimeters.

  5. Can the GP2D006A065C sensor be used outdoors?

    • The GP2D006A065C sensor is primarily designed for indoor use and may not perform reliably outdoors due to environmental factors.

  6. What are some common applications of the GP2D006A065C sensor?

    • Common applications of the GP2D006A065C sensor include robotics, automation, and proximity sensing in various technical solutions.

  7. Does the GP2D006A065C sensor require calibration?

    • Yes, the GP2D006A065C sensor may require calibration to ensure accurate distance measurements.

  8. Is the GP2D006A065C sensor affected by ambient light?

    • The GP2D006A065C sensor can be affected by ambient light, so it's important to consider lighting conditions in its application.

  9. What output does the GP2D006A065C sensor provide?

    • The GP2D006A065C sensor typically provides an analog output proportional to the measured distance.

  10. Are there any limitations to consider when using the GP2D006A065C sensor?

    • Some limitations to consider when using the GP2D006A065C sensor include its limited range, sensitivity to surface reflectivity, and potential interference from other infrared sources.