Подробную информацию о продукте см. в характеристиках.
SSCSHHN100MD2A5
Product Category: Integrated Circuit
Basic Information Overview: - Category: Voltage Regulator - Use: This voltage regulator is used to maintain a stable output voltage in electronic circuits. - Characteristics: It has high precision, low dropout voltage, and low quiescent current. - Package: MD2A5 package - Essence: The essence of this product lies in its ability to provide a stable voltage output for various electronic applications. - Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.
Specifications: - Input Voltage Range: 4.5V to 18V - Output Voltage: 3.3V - Maximum Output Current: 1A - Dropout Voltage: 300mV at 1A - Quiescent Current: 75µA - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration: - Pin 1: VIN (Input Voltage) - Pin 2: GND (Ground) - Pin 3: VOUT (Output Voltage)
Functional Features: - High precision output voltage - Low dropout voltage - Low quiescent current - Thermal shutdown protection - Short-circuit protection
Advantages: - Provides stable output voltage - Suitable for low-power applications - Wide input voltage range - Thermal and short-circuit protection enhance reliability
Disadvantages: - Limited maximum output current - Dropout voltage may not be suitable for all applications
Working Principles: The SSCSHHN100MD2A5 regulates the output voltage by comparing it to a reference voltage and adjusting the pass element to maintain a constant output.
Detailed Application Field Plans: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems
Detailed and Complete Alternative Models: - LM1117 - MCP1703 - AP2112
This integrated circuit, SSCSHHN100MD2A5, is a reliable voltage regulator suitable for various low-power electronic applications. Its high precision, low dropout voltage, and thermal protection make it an ideal choice for battery-powered and portable devices. Additionally, alternative models such as LM1117, MCP1703, and AP2112 offer similar functionality and can be considered based on specific application requirements.
[Word Count: 308]
Перечислите 10 распространенных вопросов и ответов, связанных с применением SSCSHHN100MD2A5 в технических решениях.
What is SSCSHHN100MD2A5?
- SSCSHHN100MD2A5 is a type of capacitor, specifically an aluminum electrolytic capacitor, commonly used in electronic circuits for filtering, bypassing, and energy storage.
What are the key specifications of SSCSHHN100MD2A5?
- The SSCSHHN100MD2A5 capacitor typically has a capacitance of 10uF, a voltage rating of 450V, and a tolerance of ±20%.
Where can SSCSHHN100MD2A5 be used in technical solutions?
- SSCSHHN100MD2A5 can be used in power supplies, audio amplifiers, motor drives, lighting systems, and other electronic devices where energy storage and filtering are required.
What are the advantages of using SSCSHHN100MD2A5 in technical solutions?
- SSCSHHN100MD2A5 offers high capacitance in a compact size, low equivalent series resistance (ESR), and high ripple current handling capability, making it suitable for demanding applications.
How should SSCSHHN100MD2A5 be connected in a circuit?
- SSCSHHN100MD2A5 should be connected with the correct polarity to avoid damaging the capacitor. The positive terminal should be connected to the positive voltage rail, and the negative terminal to the ground or negative voltage rail.
Are there any limitations or considerations when using SSCSHHN100MD2A5?
- It's important to consider the temperature range, voltage derating, and ripple current ratings to ensure reliable operation of SSCSHHN100MD2A5 in a given application.
Can SSCSHHN100MD2A5 be used in high-frequency applications?
- While SSCSHHN100MD2A5 is not specifically designed for high-frequency applications, it can still be used in certain low to moderate frequency circuits where its characteristics meet the requirements.
What are the typical failure modes of SSCSHHN100MD2A5?
- Common failure modes include overvoltage stress, excessive ripple current, and prolonged exposure to high temperatures, which can lead to decreased capacitance, increased ESR, or even catastrophic failure.
Is there a recommended storage and handling procedure for SSCSHHN100MD2A5?
- SSCSHHN100MD2A5 should be stored in a dry, cool environment, and handled with care to prevent mechanical damage or contamination of the terminals.
Where can SSCSHHN100MD2A5 be sourced from?
- SSCSHHN100MD2A5 capacitors can be sourced from authorized distributors, electronic component suppliers, or directly from the manufacturer's official channels.