Infineon Technologies
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
BCR08PNH6433XTMA1
Посмотреть детали Таблицы данных

BCR08PNH6433XTMA1

Product Overview

Category

The BCR08PNH6433XTMA1 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Thermal shutdown protection
  • Overcurrent protection

Package

The BCR08PNH6433XTMA1 comes in a small outline package (SOP) for surface mount applications.

Essence

The essence of this product lies in its ability to provide stable and reliable voltage regulation in various electronic devices.

Packaging/Quantity

It is typically packaged in reels containing a specific quantity, such as 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.2V to 20V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The BCR08PNH6433XTMA1 has a standard pin configuration with input, output, ground, and enable pins. The pinout is as follows: 1. VIN (Input Voltage) 2. VOUT (Output Voltage) 3. GND (Ground) 4. EN (Enable)

Functional Features

  • Voltage Regulation: The device ensures a stable output voltage even with fluctuations in the input voltage.
  • Overcurrent Protection: It safeguards the circuit by limiting the output current during overloads.
  • Thermal Shutdown: Prevents damage from excessive heat by shutting down the regulator when the temperature exceeds the specified limit.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact size
  • Built-in protection features

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise and interference

Working Principles

The BCR08PNH6433XTMA1 utilizes a feedback control mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. When the input voltage or load changes, the regulator responds accordingly to ensure a stable output.

Detailed Application Field Plans

The BCR08PNH6433XTMA1 is commonly used in: - Battery-powered devices - Portable consumer electronics - Automotive applications - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the BCR08PNH6433XTMA1 include: - LM317: A widely used adjustable voltage regulator with higher output current capability. - LT1086: Offers low dropout voltage and higher output current compared to the BCR08PNH6433XTMA1. - L78xx Series: Fixed voltage regulators available in various output voltage options.

In conclusion, the BCR08PNH6433XTMA1 is a reliable voltage regulator with precise regulation capabilities, making it suitable for a wide range of electronic applications.

[Word Count: 410]

Перечислите 10 распространенных вопросов и ответов, связанных с применением BCR08PNH6433XTMA1 в технических решениях.

  1. What is BCR08PNH6433XTMA1?

    • BCR08PNH6433XTMA1 is a silicon NPN Darlington transistor designed for use in general-purpose amplifier and low-speed switching applications.

  2. What are the key features of BCR08PNH6433XTMA1?

    • The key features include high current capability, low saturation voltage, and built-in resistor for base drive.

  3. What are the typical applications of BCR08PNH6433XTMA1?

    • Typical applications include relay drivers, hammer drivers, lamp drivers, and display drivers.

  4. What is the maximum collector current of BCR08PNH6433XTMA1?

    • The maximum collector current is 0.7A.

  5. What is the maximum collector-emitter voltage of BCR08PNH6433XTMA1?

    • The maximum collector-emitter voltage is 50V.

  6. Does BCR08PNH6433XTMA1 require an external base resistor?

    • No, it has a built-in resistor for base drive.

  7. What is the thermal resistance of BCR08PNH6433XTMA1?

    • The thermal resistance is 125°C/W.

  8. Is BCR08PNH6433XTMA1 suitable for low-speed switching applications?

    • Yes, it is suitable for low-speed switching applications.

  9. What is the package type of BCR08PNH6433XTMA1?

    • It comes in a TO-92MOD package.

  10. Are there any recommended alternative transistors to BCR08PNH6433XTMA1?

    • Some recommended alternatives include BCR08AM-12L, BCR08AM-12LB, and BCR08AM-12LG.