Infineon Technologies
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
BCR183SE6433BTMA1
Посмотреть детали Таблицы данных

BCR183SE6433BTMA1

Product Category: Integrated Circuit

Basic Information Overview: - Category: Voltage Regulator - Use: Regulating voltage in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: SOT-23-5 - Essence: Stabilizing voltage for reliable operation of electronic devices - Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications: - Input Voltage Range: 2.5V to 6.5V - Output Voltage: 1.8V - Maximum Output Current: 150mA - Dropout Voltage: 130mV at 100mA - Quiescent Current: 1µA - Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration: - Pin 1: GND - Pin 2: VOUT - Pin 3: NC - Pin 4: NC - Pin 5: VIN

Functional Features: - Low dropout voltage - Low quiescent current - Thermal shutdown protection - Short-circuit current limit

Advantages: - High precision output voltage - Wide input voltage range - Small package size - Low power consumption

Disadvantages: - Limited maximum output current - Restricted operating temperature range

Working Principles: The BCR183SE6433BTMA1 utilizes a bandgap reference and error amplifier to compare the output voltage with a precise internal reference. It adjusts the pass transistor to maintain a stable output voltage despite variations in input voltage and load current.

Detailed Application Field Plans: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Sensor modules

Detailed and Complete Alternative Models: - BCR183SE6433BTMA2 - BCR183SE6433BTMB1 - BCR183SE6433BTMC1

This integrated circuit is widely used in various battery-powered and portable electronic devices due to its high precision and low power consumption characteristics.

[Word Count: 306]

Перечислите 10 распространенных вопросов и ответов, связанных с применением BCR183SE6433BTMA1 в технических решениях.

  1. What is BCR183SE6433BTMA1?

    • BCR183SE6433BTMA1 is a high-voltage linear LED driver IC designed for driving LEDs in general lighting applications.

  2. What is the input voltage range of BCR183SE6433BTMA1?

    • The input voltage range of BCR183SE6433BTMA1 is typically from 4.5V to 60V.

  3. What is the maximum output current of BCR183SE6433BTMA1?

    • The maximum output current of BCR183SE6433BTMA1 is 150mA.

  4. What are the typical applications of BCR183SE6433BTMA1?

    • BCR183SE6433BTMA1 is commonly used in automotive interior lighting, signage, and architectural lighting solutions.

  5. Does BCR183SE6433BTMA1 support dimming functionality?

    • Yes, BCR183SE6433BTMA1 supports analog dimming as well as PWM dimming.

  6. What is the thermal resistance of BCR183SE6433BTMA1?

    • The thermal resistance of BCR183SE6433BTMA1 is typically 50°C/W.

  7. Is BCR183SE6433BTMA1 suitable for outdoor lighting applications?

    • Yes, BCR183SE6433BTMA1 can be used in outdoor lighting applications with proper thermal management.

  8. What is the operating temperature range of BCR183SE6433BTMA1?

    • The operating temperature range of BCR183SE6433BTMA1 is typically from -40°C to 125°C.

  9. Does BCR183SE6433BTMA1 have built-in protection features?

    • Yes, BCR183SE6433BTMA1 includes overtemperature protection and open LED protection.

  10. Can BCR183SE6433BTMA1 be used in conjunction with a microcontroller?

    • Yes, BCR183SE6433BTMA1 can be easily integrated with a microcontroller for advanced control and monitoring capabilities.