Подробную информацию о продукте см. в характеристиках.
TLE49632MXTMA1
Introduction
The TLE49632MXTMA1 is a Hall sensor belonging to the category of magnetic sensors. It is commonly used for position sensing in automotive and industrial applications due to its high precision and reliability. This sensor possesses unique characteristics, comes in a small package, and plays an essential role in various systems.
Basic Information Overview
- Category: Magnetic Sensor
- Use: Position Sensing
- Characteristics: High Precision, Reliability
- Package: SOT23, 3-pin
- Essence: Detecting Magnetic Fields
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
The TLE49632MXTMA1 has the following specifications: - Operating Voltage: 3.8V to 24V - Output Current: 25mA - Operating Temperature Range: -40°C to 150°C - Switching Times: 5µs (typical)
Detailed Pin Configuration
The TLE49632MXTMA1 has a 3-pin SOT23 package with the following pin configuration: 1. VCC 2. GND 3. Output
Functional Features
- High Sensitivity to Magnetic Fields
- Reverse Polarity Protection
- Overvoltage Protection
- Short-Circuit Protection
Advantages and Disadvantages
Advantages
- High Precision
- Wide Operating Voltage Range
- Robustness in Harsh Environments
Disadvantages
- Limited Output Current
- Sensitivity to External Magnetic Interference
Working Principles
The TLE49632MXTMA1 operates based on the Hall effect, where it detects changes in magnetic fields and converts them into electrical signals. When exposed to a magnetic field, the sensor generates a voltage proportional to the field's strength, enabling precise position sensing.
Detailed Application Field Plans
The TLE49632MXTMA1 is widely used in the following applications: - Automotive: Throttle Position Sensors, Gear Shifters - Industrial: Motor Control, Proximity Detection
Detailed and Complete Alternative Models
Some alternative models to the TLE49632MXTMA1 include: - TLE4966V: Similar performance with different package options - A1324: Lower cost alternative with slightly reduced precision
In conclusion, the TLE49632MXTMA1 is a highly reliable and precise magnetic sensor suitable for various automotive and industrial applications. Its robustness and sensitivity make it a preferred choice for position sensing in challenging environments.
[Word Count: 320]
Перечислите 10 распространенных вопросов и ответов, связанных с применением TLE49632MXTMA1 в технических решениях.
What is the TLE49632MXTMA1?
- The TLE49632MXTMA1 is a high-precision Hall effect sensor designed for various technical solutions, including position and speed sensing applications.
What is the operating voltage range of the TLE49632MXTMA1?
- The operating voltage range of the TLE49632MXTMA1 is typically between 3.5V and 18V, making it suitable for a wide range of electronic systems.
What is the output signal format of the TLE49632MXTMA1?
- The TLE49632MXTMA1 provides a digital output signal in the form of a push-pull or open-drain configuration, depending on the specific application requirements.
Can the TLE49632MXTMA1 be used for rotary position sensing?
- Yes, the TLE49632MXTMA1 can be effectively utilized for rotary position sensing due to its high accuracy and reliability in detecting magnetic fields.
What is the temperature range for operation of the TLE49632MXTMA1?
- The TLE49632MXTMA1 is designed to operate within a temperature range of -40°C to 150°C, ensuring its suitability for demanding environmental conditions.
Does the TLE49632MXTMA1 require external compensation for temperature effects?
- No, the TLE49632MXTMA1 features integrated temperature compensation, eliminating the need for external circuitry to address temperature-related variations.
Is the TLE49632MXTMA1 suitable for automotive applications?
- Yes, the TLE49632MXTMA1 is AEC-Q100 qualified, making it well-suited for use in automotive systems such as throttle position sensing and gearbox control.
What are the key advantages of using the TLE49632MXTMA1 in technical solutions?
- The TLE49632MXTMA1 offers high precision, low power consumption, robustness, and ESD protection, making it an ideal choice for a wide range of technical applications.
Can the TLE49632MXTMA1 be used in safety-critical systems?
- Yes, the TLE49632MXTMA1 complies with relevant safety standards and can be employed in safety-critical systems, providing reliable and accurate performance.
Are evaluation boards or reference designs available for the TLE49632MXTMA1?
- Yes, evaluation boards and reference designs are available to facilitate the integration and testing of the TLE49632MXTMA1 in various technical solutions.