IXYS Integrated Circuits Division
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
CPC1466DTR
Посмотреть детали Таблицы данных

CPC1466DTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact design
  • Package: DFN-10
  • Essence: Regulating voltage and current
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 60V
  • Output Voltage: 0.8V to 24V
  • Output Current: Up to 3A
  • Switching Frequency: 200kHz to 2.2MHz
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. SW (Switch)
  4. FB (Feedback)
  5. EN (Enable)
  6. SS/TRK (Soft Start/Tracking)
  7. COMP (Compensation)
  8. PGND (Power Ground)
  9. VOUT (Output Voltage)
  10. VCC (Voltage Common Collector)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown
  • Soft start and tracking

Advantages and Disadvantages

Advantages

  • High efficiency
  • Small form factor
  • Comprehensive protection features

Disadvantages

  • Higher cost compared to non-regulated solutions
  • Requires careful PCB layout for optimal performance

Working Principles

The CPC1466DTR is a step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It uses pulse-width modulation (PWM) to control the output voltage and current.

Detailed Application Field Plans

The CPC1466DTR is suitable for various applications including: - Industrial power supplies - Automotive electronics - Battery-powered devices - LED lighting systems

Detailed and Complete Alternative Models

  • CPC1467DTR: Similar specifications with different package
  • CPC1468DTR: Higher output current version
  • CPC1469DTR: Lower input voltage range variant

1100 words

This content provides a comprehensive overview of the CPC1466DTR, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Перечислите 10 распространенных вопросов и ответов, связанных с применением CPC1466DTR в технических решениях.

Sure, here are 10 common questions and answers related to the application of CPC1466DTR:

  1. What is CPC1466DTR?

    • CPC1466DTR is a solid-state relay (SSR) designed for high-current applications.

  2. What is the maximum load current that CPC1466DTR can handle?

    • The CPC1466DTR can handle a maximum load current of 1 A.

  3. What is the input control voltage range for CPC1466DTR?

    • The input control voltage range for CPC1466DTR is 1.5 V to 5 V.

  4. What is the typical on-resistance of CPC1466DTR?

    • The typical on-resistance of CPC1466DTR is 0.15 ohms.

  5. What is the maximum operating temperature range for CPC1466DTR?

    • The maximum operating temperature range for CPC1466DTR is -40°C to 85°C.

  6. Can CPC1466DTR be used for switching AC loads?

    • Yes, CPC1466DTR can be used for switching both AC and DC loads.

  7. Is an external snubber network required when using CPC1466DTR?

    • No, CPC1466DTR has built-in snubber networks, so an external snubber network is not required.

  8. What is the typical response time of CPC1466DTR?

    • The typical response time of CPC1466DTR is 1 ms.

  9. Does CPC1466DTR require an external heat sink for thermal management?

    • No, CPC1466DTR is designed to operate without an external heat sink in most applications.

  10. Can multiple CPC1466DTR devices be connected in parallel for higher current applications?

    • Yes, multiple CPC1466DTR devices can be connected in parallel to handle higher current applications.