Linear Technology/Analog Devices
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
LTC2955CDDB-2

LTC2955CDDB-2

Product Overview

Category

LTC2955CDDB-2 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and control.

Characteristics

  • Integrated circuit
  • Power management and control functionality
  • Low power consumption
  • Small form factor
  • High reliability

Package

LTC2955CDDB-2 is available in a DFN (Dual Flat No-Lead) package.

Essence

The essence of LTC2955CDDB-2 lies in its ability to efficiently manage and control power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 26.5V
  • Quiescent Current: 20µA
  • Operating Temperature Range: -40°C to 85°C
  • Output Voltage Range: 1.8V to 5.5V
  • Maximum Load Current: 200mA

Detailed Pin Configuration

The LTC2955CDDB-2 has the following pin configuration:

  1. VIN - Input voltage
  2. GND - Ground
  3. EN - Enable pin
  4. PGOOD - Power good indicator
  5. VOUT - Output voltage

Functional Features

  • Power-on reset
  • Undervoltage lockout
  • Adjustable output voltage
  • Power good indicator
  • Low quiescent current
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • Efficient power management
  • Reliable operation
  • Compact size
  • Wide input voltage range
  • Adjustable output voltage

Disadvantages

  • Limited maximum load current (200mA)
  • Relatively high operating temperature range (-40°C to 85°C)

Working Principles

LTC2955CDDB-2 operates by monitoring the input voltage and generating a power-on reset signal when the voltage rises above a certain threshold. It also incorporates an undervoltage lockout feature to ensure proper operation within the specified voltage range. The adjustable output voltage allows for flexibility in different applications.

Detailed Application Field Plans

LTC2955CDDB-2 finds application in various electronic devices, including but not limited to: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive electronics - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

  1. LTC2954CDDB-1: Similar functionality with a lower maximum load current of 100mA.
  2. LTC2956CDDB-3: Higher maximum load current of 500mA, suitable for applications requiring higher power.

These alternative models provide options based on specific requirements and power demands.

In conclusion, LTC2955CDDB-2 is an integrated circuit designed for efficient power management and control in electronic devices. Its compact size, wide input voltage range, and adjustable output voltage make it suitable for various applications. While it has limitations in terms of maximum load current and operating temperature range, alternative models are available to cater to different power requirements.

Перечислите 10 распространенных вопросов и ответов, связанных с применением LTC2955CDDB-2 в технических решениях.

Sure! Here are 10 common questions and answers related to the application of LTC2955CDDB-2 in technical solutions:

  1. Q: What is the LTC2955CDDB-2? A: The LTC2955CDDB-2 is a power supply monitor and push-button controller IC designed for use in various technical solutions.

  2. Q: What are the key features of the LTC2955CDDB-2? A: The key features include wide input voltage range, adjustable reset timeout period, push-button control, and low quiescent current.

  3. Q: How does the LTC2955CDDB-2 help in power supply monitoring? A: It monitors the input voltage and generates a reset signal when the voltage falls below a certain threshold, ensuring proper operation of the system.

  4. Q: Can the LTC2955CDDB-2 be used to control power sequencing in a system? A: Yes, it can be used to enable or disable power supplies in a specific sequence, preventing potential issues during startup or shutdown.

  5. Q: Is the reset timeout period adjustable in the LTC2955CDDB-2? A: Yes, the reset timeout period can be adjusted using external capacitors, allowing customization based on specific system requirements.

  6. Q: Can the LTC2955CDDB-2 be used with different types of push-buttons? A: Yes, it supports various types of push-buttons, including momentary, latching, and toggle switches.

  7. Q: Does the LTC2955CDDB-2 have any built-in protection features? A: Yes, it includes features like undervoltage lockout (UVLO) and reverse battery protection to safeguard the system from potential damage.

  8. Q: What is the typical operating voltage range of the LTC2955CDDB-2? A: The typical operating voltage range is from 2.7V to 26V, making it suitable for a wide range of applications.

  9. Q: Can the LTC2955CDDB-2 be used in battery-powered systems? A: Yes, it can be used in battery-powered systems as it has a low quiescent current and supports a wide input voltage range.

  10. Q: Are there any application notes or reference designs available for the LTC2955CDDB-2? A: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs that can help in implementing the LTC2955CDDB-2 in various technical solutions.

Please note that the answers provided here are general and may vary based on specific implementation requirements. It's always recommended to refer to the datasheet and relevant documentation for accurate information.