Подробную информацию о продукте см. в характеристиках.
15E1C2.75 Product Overview
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High precision, low dropout voltage, compact size
- Package: TO-220 package
- Essence: Regulates input voltage to a stable output voltage
- Packaging/Quantity: Typically sold in reels of 1000 units
Specifications
- Input Voltage Range: 4.5V to 24V
- Output Voltage: 2.75V
- Output Current: Up to 1.5A
- Dropout Voltage: 0.5V at 1A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Pin 1 (Input): Connects to the input voltage source
- Pin 2 (Ground): Connected to the ground reference
- Pin 3 (Output): Provides the regulated output voltage
Functional Features
- Voltage Regulation: Maintains a stable output voltage despite fluctuations in the input voltage
- Overcurrent Protection: Safeguards against excessive current flow
- Thermal Shutdown: Prevents overheating by shutting down the regulator if the temperature exceeds safe limits
Advantages and Disadvantages
Advantages
- High precision regulation
- Low dropout voltage
- Compact size
Disadvantages
- Limited maximum output current
- Requires heat sinking for high power applications
Working Principles
The 15E1C2.75 is a linear voltage regulator that uses a feedback mechanism to adjust the output voltage based on the input and reference voltages. It utilizes a pass transistor to control the output voltage and maintain it at the desired level.
Detailed Application Field Plans
The 15E1C2.75 is commonly used in various electronic devices such as: - Battery-powered equipment - Portable electronics - Automotive systems
Detailed and Complete Alternative Models
- LM317: Adjustable voltage regulator with similar characteristics
- L78xx: Fixed output voltage regulators available in various voltage options
In conclusion, the 15E1C2.75 voltage regulator offers precise and reliable voltage regulation in a compact package, making it suitable for a wide range of electronic applications.
[Word Count: 298]
Перечислите 10 распространенных вопросов и ответов, связанных с применением 15E1C2.75 в технических решениях.
What is 15E1C2.75 and its application in technical solutions?
- 15E1C2.75 is a specific type of material or component used in technical solutions, often known for its high strength and corrosion resistance. It is commonly used in structural applications such as aerospace, automotive, and industrial equipment.
What are the key properties of 15E1C2.75 that make it suitable for technical solutions?
- The key properties of 15E1C2.75 include high tensile strength, excellent corrosion resistance, good weldability, and high temperature stability. These properties make it ideal for demanding technical applications.
In what industries is 15E1C2.75 commonly used?
- 15E1C2.75 is commonly used in industries such as aerospace, marine engineering, chemical processing, and oil and gas due to its exceptional mechanical properties and resistance to harsh environments.
How does 15E1C2.75 compare to other materials in technical solutions?
- Compared to other materials, 15E1C2.75 offers superior strength-to-weight ratio, better resistance to corrosion, and enhanced performance at elevated temperatures, making it a preferred choice in many technical applications.
What are the typical fabrication methods used for 15E1C2.75 in technical solutions?
- Typical fabrication methods for 15E1C2.75 include machining, welding, forming, and heat treatment to achieve the desired shapes and properties required for specific technical solutions.
Are there any limitations or considerations when using 15E1C2.75 in technical solutions?
- While 15E1C2.75 offers excellent properties, it may be more expensive than some alternative materials, and special care must be taken during welding to avoid degradation of its properties.
Can 15E1C2.75 be used in combination with other materials in technical solutions?
- Yes, 15E1C2.75 can be used in combination with other materials through techniques such as composite manufacturing or hybrid structures to optimize performance and cost-effectiveness in technical solutions.
What are the environmental considerations when using 15E1C2.75 in technical solutions?
- 15E1C2.75 is known for its resistance to corrosion, making it suitable for use in harsh environments. However, proper maintenance and protection against specific corrosive agents should still be considered.
Are there any specific standards or certifications related to the use of 15E1C2.75 in technical solutions?
- Depending on the industry and application, there may be specific standards or certifications (e.g., ASTM, ASME, ISO) that govern the use of 15E1C2.75 in technical solutions, ensuring compliance with quality and safety requirements.
What are some examples of successful technical solutions utilizing 15E1C2.75?
- Examples of successful technical solutions utilizing 15E1C2.75 include aircraft components, pressure vessels, offshore structures, and high-performance automotive parts, showcasing its versatility and reliability in demanding applications.