Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
30KP51CA-TP

30KP51CA-TP Product Overview

Introduction

The 30KP51CA-TP is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides a comprehensive overview of the 30KP51CA-TP, including its product details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients induced by lightning and other transient voltage events
  • Characteristics: High performance, low clamping voltage, fast response time
  • Package: Through-hole or surface mount
  • Essence: Provides robust protection for sensitive electronic equipment
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies based on supplier

Specifications

  • Peak Pulse Power: 30000 W
  • Breakdown Voltage Range: 58.9 V to 65.1 V
  • Operating Voltage: 50 V
  • Clamping Voltage: 82.4 V at 100 A
  • Peak Pulse Current: 457 A
  • Reverse Standoff Voltage: 51 V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 30KP51CA-TP typically features a standard diode package with two leads. The pin configuration includes: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to safe levels
  • Fast Response Time: Rapid reaction to transient events for enhanced protection
  • High Peak Pulse Power: Capable of handling large transient currents without degradation

Advantages and Disadvantages

Advantages

  • Robust protection against transient voltage events
  • Fast response time ensures minimal impact on protected circuits
  • High peak pulse power handling capability

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of mounting and layout for optimal performance

Working Principles

The 30KP51CA-TP operates based on the principle of avalanche breakdown. When a transient voltage event occurs, the diode rapidly switches into its low impedance state, diverting excess current away from the protected circuit. This action effectively limits the voltage across the circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The 30KP51CA-TP is widely used in various applications requiring robust transient voltage protection, including: - Telecommunication equipment - Industrial control systems - Power supplies - Automotive electronics - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

  • 30KP36CA-TP: Lower breakdown voltage range for specific application requirements
  • 30KP68CA-TP: Higher breakdown voltage range for increased protection levels
  • 30KP51A-TP: Surface mount variant for space-constrained applications

In conclusion, the 30KP51CA-TP transient voltage suppressor diode offers high-performance protection against transient voltage events, making it an essential component in safeguarding sensitive electronic equipment across various industries.

[Word Count: 498]

Перечислите 10 распространенных вопросов и ответов, связанных с применением 30KP51CA-TP в технических решениях.

Sure, here are 10 common questions and answers related to the application of 30KP51CA-TP in technical solutions:

  1. What is the voltage rating of 30KP51CA-TP?

    • The voltage rating of 30KP51CA-TP is typically 51 volts.
  2. What is the peak pulse power of 30KP51CA-TP?

    • The peak pulse power of 30KP51CA-TP is typically 3000 watts.
  3. What are the typical applications of 30KP51CA-TP?

    • 30KP51CA-TP is commonly used in surge protection for telecommunications equipment, industrial controls, and automotive electronics.
  4. What is the maximum clamping voltage of 30KP51CA-TP?

    • The maximum clamping voltage of 30KP51CA-TP is typically 82.4 volts.
  5. What is the response time of 30KP51CA-TP?

    • The response time of 30KP51CA-TP is typically less than 1 picosecond.
  6. Is 30KP51CA-TP suitable for high-speed data lines?

    • Yes, 30KP51CA-TP is suitable for high-speed data lines due to its fast response time and low clamping voltage.
  7. Can 30KP51CA-TP be used in outdoor applications?

    • Yes, 30KP51CA-TP is designed for outdoor applications and can withstand harsh environmental conditions.
  8. Does 30KP51CA-TP meet industry standards for surge protection?

    • Yes, 30KP51CA-TP complies with industry standards such as IEC 61000-4-5 for surge protection devices.
  9. What is the operating temperature range of 30KP51CA-TP?

    • The operating temperature range of 30KP51CA-TP is typically -55°C to +175°C.
  10. Is 30KP51CA-TP RoHS compliant?

    • Yes, 30KP51CA-TP is RoHS compliant, making it suitable for use in environmentally sensitive applications.

I hope these answers provide the information you were looking for! If you need further details on any specific question, feel free to ask.