Micro Commercial Co
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
BZT52C11T-TP
Посмотреть детали Таблицы данных

BZT52C11T-TP: Product Overview and Specifications

Introduction

The BZT52C11T-TP is a semiconductor product belonging to the category of Zener diodes. This component is widely used in electronic circuits for voltage regulation and protection against voltage spikes.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection
  • Characteristics: Precise voltage regulation, low leakage current
  • Package: SOD-123 package
  • Essence: Semiconductor material with specific doping
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Voltage: 11V
  • Power Dissipation: 500mW
  • Forward Voltage: 1V
  • Reverse Current: 5μA
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The BZT52C11T-TP has two pins, anode, and cathode, which are identified by the polarity markings on the device.

Functional Features

  • Precise voltage regulation at 11V
  • Low reverse leakage current
  • Fast response time to voltage spikes

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Compact SOD-123 package
  • Low power dissipation

Disadvantages

  • Limited power handling capacity
  • Sensitivity to temperature variations

Working Principles

The BZT52C11T-TP operates based on the principle of the Zener effect, where it maintains a constant voltage drop across its terminals when it is reverse-biased.

Detailed Application Field Plans

The BZT52C11T-TP finds extensive use in various electronic applications, including: - Voltage regulation in power supplies - Overvoltage protection in consumer electronics - Signal clamping in communication circuits

Detailed and Complete Alternative Models

Some alternative models to the BZT52C11T-TP include: - BZX84C11LT1G - MMBZ5231BLT1G - PZU11B2A,115

In conclusion, the BZT52C11T-TP Zener diode offers precise voltage regulation and protection, making it an essential component in various electronic circuits.

[Word count: 298]

Перечислите 10 распространенных вопросов и ответов, связанных с применением BZT52C11T-TP в технических решениях.

  1. What is the maximum power dissipation of BZT52C11T-TP?

    • The maximum power dissipation of BZT52C11T-TP is 300mW.

  2. What is the forward voltage drop of BZT52C11T-TP?

    • The forward voltage drop of BZT52C11T-TP is typically 0.9V at a forward current of 10mA.

  3. What is the reverse standoff voltage of BZT52C11T-TP?

    • The reverse standoff voltage of BZT52C11T-TP is 11V.

  4. What is the operating temperature range of BZT52C11T-TP?

    • The operating temperature range of BZT52C11T-TP is -65°C to +150°C.

  5. Can BZT52C11T-TP be used for voltage regulation in low-power applications?

    • Yes, BZT52C11T-TP is suitable for voltage regulation in low-power applications due to its low forward voltage drop and high reverse standoff voltage.

  6. Is BZT52C11T-TP suitable for overvoltage protection in electronic circuits?

    • Yes, BZT52C11T-TP can be used for overvoltage protection in electronic circuits due to its ability to clamp excessive voltages.

  7. What are the typical applications of BZT52C11T-TP in technical solutions?

    • BZT52C11T-TP is commonly used in voltage clamping, overvoltage protection, voltage regulation, and signal conditioning applications.

  8. Does BZT52C11T-TP require a heatsink for normal operation?

    • No, BZT52C11T-TP does not require a heatsink for normal operation due to its low power dissipation.

  9. What is the package type of BZT52C11T-TP?

    • BZT52C11T-TP is available in a SOD-123 surface mount package.

  10. Is BZT52C11T-TP RoHS compliant?

    • Yes, BZT52C11T-TP is RoHS compliant, making it suitable for use in environmentally friendly electronic products.