Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
24AA16-I/MS

24AA16-I/MS

Product Overview

  • Category: EEPROM Memory
  • Use: Non-volatile memory storage for small data sets
  • Characteristics: Low power consumption, high reliability, small form factor
  • Package: MSOP (Mini Small Outline Package)
  • Essence: Provides a reliable and low-power solution for non-volatile memory storage
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Memory Size: 16 Kbit (2 Kbyte)
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  • Pin 1: A0 - Chip Address Input
  • Pin 2: A1 - Chip Address Input
  • Pin 3: A2 - Chip Address Input
  • Pin 4: VSS - Ground
  • Pin 5: SDA - Serial Data
  • Pin 6: SCL - Serial Clock
  • Pin 7: WP - Write Protect
  • Pin 8: VCC - Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 32-byte Page Write Buffer
  • Hardware Write Protection
  • Schmitt Trigger Inputs

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability and endurance
  • Small form factor
  • Easy interfacing with microcontrollers

Disadvantages

  • Limited storage capacity compared to other memory solutions
  • Slower write speeds compared to some competing technologies

Working Principles

The 24AA16-I/MS operates as a serial EEPROM, utilizing the I2C interface for communication with a microcontroller or other devices. It stores data in non-volatile memory cells, allowing for retention of information even when power is removed. The device supports byte and page write modes, enabling efficient data storage and retrieval.

Detailed Application Field Plans

The 24AA16-I/MS is commonly used in applications requiring non-volatile memory storage, such as: - Embedded systems - Industrial control systems - Consumer electronics - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

  • 24LC16B-I/SN: Similar 16 Kbit I2C EEPROM in SOIC package
  • AT24C16C-SSHM-T: 16 Kbit I2C EEPROM with additional security features
  • CAT24C16WI-GT3: 16 Kbit I2C EEPROM with wide voltage range support

In conclusion, the 24AA16-I/MS provides a reliable and low-power solution for non-volatile memory storage in various electronic applications, offering a balance of performance and efficiency.

Word Count: 426

Перечислите 10 распространенных вопросов и ответов, связанных с применением 24AA16-I/MS в технических решениях.

  1. What is the maximum clock frequency for 24AA16-I/MS?
    - The maximum clock frequency for 24AA16-I/MS is 1MHz.

  2. What is the operating voltage range for 24AA16-I/MS?
    - The operating voltage range for 24AA16-I/MS is 1.7V to 5.5V.

  3. Can 24AA16-I/MS be used in automotive applications?
    - Yes, 24AA16-I/MS is suitable for automotive applications.

  4. What is the typical write cycle time for 24AA16-I/MS?
    - The typical write cycle time for 24AA16-I/MS is 5ms.

  5. Is 24AA16-I/MS compatible with I2C protocol?
    - Yes, 24AA16-I/MS is compatible with I2C protocol.

  6. What is the endurance of 24AA16-I/MS?
    - The endurance of 24AA16-I/MS is 1,000,000 write cycles.

  7. Can 24AA16-I/MS operate at extended temperature ranges?
    - Yes, 24AA16-I/MS can operate at extended temperature ranges from -40°C to 125°C.

  8. What is the package type for 24AA16-I/MS?
    - The package type for 24AA16-I/MS is MSOP (8-lead).

  9. Does 24AA16-I/MS have built-in write protection?
    - Yes, 24AA16-I/MS has built-in hardware write protection.

  10. What is the storage temperature range for 24AA16-I/MS?
    - The storage temperature range for 24AA16-I/MS is -65°C to 150°C.