Microchip Technology
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
AT42QT2160-MMUR
Посмотреть детали Таблицы данных

AT42QT2160-MMUR

Product Overview

  • Category: Integrated Circuit
  • Use: Capacitive Touch Sensor
  • Characteristics:
    • High sensitivity
    • Low power consumption
    • Compact size
  • Package: QFN (Quad Flat No-leads)
  • Essence: Capacitive touch sensing technology
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 16
  • Supply Voltage Range: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interface: I2C
  • Sensing Method: Self-capacitance
  • Sensing Range: Up to 30mm
  • Sampling Frequency: Up to 200Hz
  • Power Consumption: 3.5µA in Sleep mode, 60µA in Active mode

Detailed Pin Configuration

The AT42QT2160-MMUR has a total of 20 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. SDA - I2C data line
  3. SCL - I2C clock line
  4. IRQ - Interrupt request output
  5. GND - Ground
  6. CH0 to CH15 - Capacitive touch sensor channels
  7. RST - Reset input
  8. VSS - Negative supply voltage

Functional Features

  • Multi-channel capacitive touch sensing
  • Automatic calibration for stable performance
  • Adjustable sensitivity levels
  • Built-in noise filtering
  • Low-power sleep mode for energy efficiency
  • Interrupt-driven operation for efficient processing

Advantages

  • High sensitivity allows for reliable touch detection
  • Low power consumption prolongs battery life
  • Compact size enables integration into small devices
  • Easy-to-use I2C interface simplifies communication
  • Automatic calibration ensures consistent performance

Disadvantages

  • Limited number of channels (16)
  • Sensing range may be affected by environmental factors
  • Requires external components for proper operation

Working Principles

The AT42QT2160-MMUR utilizes capacitive touch sensing technology to detect touch inputs. Each channel acts as a capacitive sensor, measuring changes in capacitance when a conductive object, such as a finger, approaches. The sensor's sensitivity can be adjusted to accommodate different touch strengths. The I2C interface allows for easy communication with microcontrollers or other devices.

Detailed Application Field Plans

The AT42QT2160-MMUR is widely used in various applications, including:

  1. Consumer Electronics:

    • Mobile phones and tablets
    • Remote controls
    • Gaming consoles

  2. Home Automation:

    • Touch-sensitive light switches
    • Thermostats
    • Security systems

  3. Automotive:

    • Touchscreen infotainment systems
    • Steering wheel controls
    • Climate control panels

  4. Industrial Control:

    • Human-machine interfaces
    • Control panels
    • Keypads

Detailed and Complete Alternative Models

  1. AT42QT1010: Single-channel capacitive touch sensor IC
  2. AT42QT2120: 12-channel capacitive touch sensor IC
  3. AT42QT1481: Proximity and touch controller IC
  4. AT42QT1070: 7-channel capacitive touch sensor IC

These alternative models offer similar functionality and can be considered based on specific project requirements.

Word count: 329 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением AT42QT2160-MMUR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of AT42QT2160-MMUR in technical solutions:

  1. Q: What is AT42QT2160-MMUR? A: AT42QT2160-MMUR is a capacitive touch sensor IC that can be used to detect touch inputs in various technical solutions.

  2. Q: How does AT42QT2160-MMUR work? A: AT42QT2160-MMUR works by measuring changes in capacitance when a conductive object, such as a finger, comes into contact with a touchpad or electrode.

  3. Q: What are the typical applications of AT42QT2160-MMUR? A: AT42QT2160-MMUR is commonly used in applications like consumer electronics, home automation, industrial control systems, automotive interfaces, and more.

  4. Q: Can AT42QT2160-MMUR support multiple touch inputs simultaneously? A: Yes, AT42QT2160-MMUR can support multiple touch inputs simultaneously, allowing for multi-touch functionality in compatible applications.

  5. Q: How many touch channels does AT42QT2160-MMUR support? A: AT42QT2160-MMUR supports up to 16 touch channels, providing flexibility in designing touch-sensitive interfaces.

  6. Q: Is AT42QT2160-MMUR compatible with different touchpad sizes? A: Yes, AT42QT2160-MMUR can be used with touchpads of various sizes, making it suitable for different design requirements.

  7. Q: Does AT42QT2160-MMUR require external components for operation? A: Yes, AT42QT2160-MMUR requires external passive components like resistors and capacitors for proper operation.

  8. Q: Can AT42QT2160-MMUR be easily integrated into existing designs? A: Yes, AT42QT2160-MMUR is designed to be easily integrated into existing designs, thanks to its compact size and straightforward interface.

  9. Q: What is the power supply voltage range for AT42QT2160-MMUR? A: The power supply voltage range for AT42QT2160-MMUR is typically between 2.5V and 5.5V.

  10. Q: Are there any development tools or resources available for AT42QT2160-MMUR? A: Yes, Microchip provides development tools, documentation, and application notes to assist in the design and implementation of AT42QT2160-MMUR in technical solutions.

Please note that these answers are general and may vary depending on specific requirements and configurations.