Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SST25VF016B-50-4C-QAF-T

SST25VF016B-50-4C-QAF-T

Product Overview

The SST25VF016B-50-4C-QAF-T belongs to the category of Serial Quad I/O (SQI) Flash memory products. It is commonly used for storing program code and data in a wide range of electronic devices, including consumer electronics, industrial equipment, and automotive applications. The SST25VF016B-50-4C-QAF-T is characterized by its high-speed read and write operations, low power consumption, small package size, and compatibility with SPI interface standards. It is typically available in a compact package and can be purchased individually or in bulk quantities.

Specifications

  • Memory Capacity: 16 Megabits (2M x 8-bit/1M x 16-bit)
  • Operating Voltage: 2.7V to 3.6V
  • Interface: SPI (Serial Peripheral Interface) with Quad I/O support
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: 8-pin SOIC (150 mil), 8-contact WSON (6x5 mm)

Detailed Pin Configuration

The SST25VF016B-50-4C-QAF-T features the following pin configuration: 1. CS - Chip Select 2. SO - Serial Data Output 3. WP# - Write Protect 4. GND - Ground 5. SI - Serial Data Input 6. SCK - Serial Clock 7. HOLD# - Hold 8. VCC - Power Supply

Functional Features

  • Quad I/O Support: Enables high-speed data transfer using four I/O lines, enhancing read and write performance.
  • Low Power Consumption: Optimized for energy efficiency, making it suitable for battery-powered devices.
  • Uniform Sector Architecture: Allows for flexible and efficient data storage and retrieval.
  • Security Features: Supports hardware and software-based protection mechanisms to safeguard stored data.

Advantages and Disadvantages

Advantages

  • High-speed Quad I/O interface
  • Low power consumption
  • Compact package size
  • Enhanced security features

Disadvantages

  • Limited storage capacity compared to larger flash memory options
  • Sensitive to voltage fluctuations

Working Principles

The SST25VF016B-50-4C-QAF-T operates based on the principles of non-volatile memory storage using floating gate technology. When data is written to the memory, charge is trapped in the floating gate, preserving the information even when the power is removed. The Quad I/O interface allows for parallel data transfer, significantly improving data access speeds.

Detailed Application Field Plans

The SST25VF016B-50-4C-QAF-T is well-suited for various applications, including: - Embedded Systems: Used for firmware storage in microcontrollers and system-on-chip (SoC) devices. - Automotive Electronics: Employed in vehicle infotainment systems, instrument clusters, and advanced driver-assistance systems (ADAS). - Industrial Control: Integrated into industrial automation equipment, PLCs, and robotics for program storage and data logging.

Detailed and Complete Alternative Models

  • AT25SF161: Offers similar specifications and functionality with compatibility to SST25VF016B-50-4C-QAF-T.
  • W25Q16JV: Provides an alternative option with comparable features and performance characteristics.

In conclusion, the SST25VF016B-50-4C-QAF-T is a versatile Serial Quad I/O Flash memory product that offers high-speed data transfer, low power consumption, and secure data storage capabilities. Its compact package and compatibility with SPI interface standards make it an ideal choice for a wide range of electronic applications.

Word Count: 507

Перечислите 10 распространенных вопросов и ответов, связанных с применением SST25VF016B-50-4C-QAF-T в технических решениях.

  1. What is the SST25VF016B-50-4C-QAF-T?

    • The SST25VF016B-50-4C-QAF-T is a 16 Mbit serial flash memory with a 4-bit multiplexed I/O interface.
  2. What are the typical applications of SST25VF016B-50-4C-QAF-T?

    • It is commonly used in applications such as consumer electronics, industrial control systems, and automotive systems for storing program code or data.
  3. What is the operating voltage range of SST25VF016B-50-4C-QAF-T?

    • The operating voltage range is typically from 2.7V to 3.6V.
  4. What is the maximum clock frequency supported by SST25VF016B-50-4C-QAF-T?

    • The maximum clock frequency is 104 MHz.
  5. What is the typical power consumption of SST25VF016B-50-4C-QAF-T?

    • The typical power consumption is low, making it suitable for battery-powered devices.
  6. Does SST25VF016B-50-4C-QAF-T support sector erase and block erase operations?

    • Yes, it supports both sector erase and block erase operations.
  7. What is the temperature range for operation of SST25VF016B-50-4C-QAF-T?

    • The device can typically operate within a temperature range of -40°C to 85°C.
  8. Can SST25VF016B-50-4C-QAF-T be used for over-the-air (OTA) firmware updates?

    • Yes, it can be used for OTA firmware updates in IoT and embedded systems.
  9. Is SST25VF016B-50-4C-QAF-T compatible with standard SPI interfaces?

    • Yes, it is compatible with standard SPI interfaces and also supports a 4-bit multiplexed I/O interface.
  10. What are the key features that make SST25VF016B-50-4C-QAF-T suitable for technical solutions?

    • Some key features include high-speed read/write operations, low power consumption, wide operating voltage range, and compatibility with various system interfaces.