Подробную информацию о продукте см. в характеристиках.
2N5095 Transistor
Product Overview
Category:
The 2N5095 is a bipolar junction NPN transistor.
Use:
It is commonly used as a general-purpose amplifier or switch in electronic circuits.
Characteristics:
- Low power dissipation
- High current gain
- Medium voltage capability
Package:
The 2N5095 is typically available in a TO-92 package.
Essence:
The essence of the 2N5095 lies in its ability to amplify and switch electronic signals with low power consumption.
Packaging/Quantity:
The 2N5095 is usually sold in reels or tubes containing multiple units, with quantities varying based on manufacturer and distributor.
Specifications
- Collector-Emitter Voltage (VCEO): 30V
- Collector-Base Voltage (VCBO): 30V
- Emitter-Base Voltage (VEBO): 5V
- Collector Current (IC): 600mA
- Power Dissipation (PD): 625mW
- Transition Frequency (fT): 150MHz
- Operating Temperature Range: -65°C to 200°C
Detailed Pin Configuration
The 2N5095 transistor has three pins: 1. Base (B) 2. Collector (C) 3. Emitter (E)
Functional Features
The 2N5095 transistor offers the following functional features: - Amplification of weak electronic signals - Switching of electronic circuits - Compatibility with various electronic applications
Advantages and Disadvantages
Advantages
- High current gain
- Low power dissipation
- Versatile use in amplification and switching circuits
Disadvantages
- Limited voltage and current ratings compared to other transistors
- Moderate operating frequency range
Working Principles
The 2N5095 operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.
Detailed Application Field Plans
The 2N5095 transistor finds application in various electronic circuits, including: - Audio amplifiers - Signal amplification stages - Switching circuits - Oscillators
Detailed and Complete Alternative Models
Some alternative models to the 2N5095 include: - 2N2222 - BC547 - 2N3904 - 2N4401
In conclusion, the 2N5095 transistor is a versatile component widely used in electronic circuits for amplification and switching purposes. Its characteristics make it suitable for a range of applications, and it has several alternative models that can be used based on specific circuit requirements.
[Word Count: 344]
Перечислите 10 распространенных вопросов и ответов, связанных с применением 2N5095 в технических решениях.
What is the 2N5095 transistor used for?
- The 2N5095 is a PNP silicon epitaxial transistor commonly used for general purpose amplification and switching applications.
What are the typical operating conditions for the 2N5095 transistor?
- The 2N5095 transistor typically operates at a maximum collector-base voltage of 60V, a maximum collector current of 0.1A, and a maximum power dissipation of 0.625W.
How do I identify the pin configuration of the 2N5095 transistor?
- The 2N5095 transistor has three pins: the emitter, base, and collector. When viewing the flat side of the transistor with the pins down, the left pin is the emitter, the middle pin is the base, and the right pin is the collector.
Can the 2N5095 be used for audio amplification?
- Yes, the 2N5095 can be used for small signal audio amplification due to its general-purpose amplification capabilities.
What are some common circuit configurations using the 2N5095?
- Common circuit configurations include common emitter amplifiers, switch circuits, and driver circuits for various electronic applications.
What are the typical gain characteristics of the 2N5095 transistor?
- The 2N5095 transistor has a typical DC current gain (hFE) ranging from 120 to 240 at a collector current of 10mA.
What are the temperature considerations for the 2N5095 transistor?
- The 2N5095 transistor is designed to operate within a temperature range of -65°C to 200°C, making it suitable for a wide range of environmental conditions.
Can the 2N5095 be used in high-frequency applications?
- While the 2N5095 can function at moderate frequencies, it is not specifically designed for high-frequency applications due to its general-purpose nature.
Are there any special considerations for driving inductive loads with the 2N5095?
- When driving inductive loads, such as relays or solenoids, it is important to use appropriate flyback diodes to protect the transistor from voltage spikes.
What are some common alternatives to the 2N5095 transistor?
- Common alternatives include the 2N3906, BC557, and 2N4403 transistors, which offer similar PNP characteristics for various technical solutions.