Microsemi Corporation
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
JANTX2N7335
Посмотреть детали Таблицы данных

JANTX2N7335

Product Overview

Category

The JANTX2N7335 belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as a general-purpose amplifier or switch in various electronic circuits.

Characteristics

  • High current and voltage ratings
  • Low noise and distortion
  • Wide operating temperature range

Package

The JANTX2N7335 is typically available in a TO-18 metal can package.

Essence

This transistor is essential for amplifying and switching signals in electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (Vcbo): 40V
  • Collector-Emitter Voltage (Vceo): 40V
  • Emitter-Base Voltage (Vebo): 5V
  • Collector Current (Ic): 600mA
  • Power Dissipation (Pd): 625mW
  • Transition Frequency (ft): 150MHz
  • Operating Temperature: -65°C to 200°C

Detailed Pin Configuration

The JANTX2N7335 has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High gain and bandwidth
  • Low saturation voltage
  • Fast switching speed

Advantages and Disadvantages

Advantages

  • Robust construction
  • Reliable performance
  • Wide operating temperature range

Disadvantages

  • Relatively larger size compared to SMD components
  • Limited frequency response compared to RF transistors

Working Principles

The JANTX2N7335 operates based on the principles of amplification and control of current flow through its three terminals. When biased correctly, it allows for signal amplification or acts as a switch in electronic circuits.

Detailed Application Field Plans

The JANTX2N7335 is widely used in the following applications: - Audio amplifiers - Signal processing circuits - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX2N7335 include: - 2N2222 - BC547 - 2N3904 - MPSA18

In conclusion, the JANTX2N7335 is a versatile BJT with high current and voltage ratings, making it suitable for a wide range of amplification and switching applications in electronic circuits.

Word count: 347

Перечислите 10 распространенных вопросов и ответов, связанных с применением JANTX2N7335 в технических решениях.

  1. What is the JANTX2N7335 transistor used for?

    • The JANTX2N7335 is a high-reliability, general-purpose NPN bipolar junction transistor commonly used in military and aerospace applications.

  2. What are the key specifications of the JANTX2N7335 transistor?

    • The JANTX2N7335 transistor typically has a maximum collector current of 600mA, a maximum collector-emitter voltage of 40V, and a maximum power dissipation of 625mW.

  3. Can the JANTX2N7335 be used in commercial applications?

    • While it is designed for high-reliability applications, the JANTX2N7335 can also be used in certain commercial and industrial applications where ruggedness and reliability are important.

  4. What are some typical circuit configurations using the JANTX2N7335?

    • The JANTX2N7335 can be used in common emitter, common base, and emitter follower configurations in various amplifier and switching circuits.

  5. Are there any specific precautions to consider when using the JANTX2N7335 in a design?

    • It's important to ensure that the operating conditions (voltage, current, temperature) do not exceed the specified limits to maintain the reliability and performance of the transistor.

  6. What are the temperature ranges for the JANTX2N7335?

    • The JANTX2N7335 is typically rated for operation over a temperature range of -65°C to +200°C, making it suitable for harsh environments.

  7. Can the JANTX2N7335 be used in high-frequency applications?

    • While the JANTX2N7335 is not specifically designed for high-frequency applications, it can still be used in moderate frequency designs with appropriate considerations for its characteristics.

  8. What are some alternative transistors to consider if the JANTX2N7335 is not available?

    • Alternatives to the JANTX2N7335 include the JANTXV2N2222A, JANTXV2N3904, and JANTXV2N4401, which are also high-reliability transistors suitable for similar applications.

  9. Is the JANTX2N7335 suitable for use in radiation-prone environments?

    • Yes, the JANTX2N7335 is designed to withstand radiation exposure, making it suitable for use in space and nuclear applications.

  10. Where can I find detailed application notes and reference designs for the JANTX2N7335?

    • Detailed application notes and reference designs for the JANTX2N7335 can be found in the manufacturer's datasheets, technical documents, and application guides, as well as through industry-specific resources and forums.