Microsemi Corporation
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
MV2N4858UB

MV2N4858UB

Product Overview

Category: Integrated Circuit
Use: Signal Amplification and Conditioning
Characteristics: High Gain, Low Noise, Small Package Size
Package: SOT-23
Essence: NPN Transistor Array
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Maximum Collector-Base Voltage (Vcbo): 40V
  • Maximum Collector-Emitter Voltage (Vceo): 30V
  • Maximum Emitter-Base Voltage (Vebo): 6V
  • Continuous Collector Current (Ic): 100mA
  • Power Dissipation (Pd): 225mW
  • Transition Frequency (ft): 150MHz

Detailed Pin Configuration

  1. Base of Transistor 1 (B1)
  2. Emitter of Transistor 1 (E1)
  3. Collector of Transistor 1 (C1)
  4. Base of Transistor 2 (B2)
  5. Emitter of Transistor 2 (E2)
  6. Collector of Transistor 2 (C2)
  7. GND
  8. Vcc

Functional Features

  • High Voltage Gain
  • Low Noise Figure
  • Small Footprint
  • Wide Bandwidth

Advantages and Disadvantages

Advantages: - Compact package size - Low noise performance - Suitable for high-frequency applications

Disadvantages: - Limited maximum collector current - Restricted voltage ratings

Working Principles

The MV2N4858UB is designed to amplify and condition small signals in electronic circuits. It consists of two NPN transistors configured as a Darlington pair, providing high gain and low noise characteristics. The transistors are housed in a compact SOT-23 package, making them suitable for space-constrained applications.

Detailed Application Field Plans

The MV2N4858UB is commonly used in audio amplifiers, sensor interfaces, and communication systems where signal conditioning and amplification are required. Its small package size and low noise figure make it ideal for portable and battery-powered devices.

Detailed and Complete Alternative Models

  • BC847B: Similar NPN transistor array with SOT-23 package
  • MMBT3904: General-purpose NPN transistor in SOT-23 package
  • 2N4401: NPN transistor with higher current and voltage ratings

This comprehensive entry provides detailed information about the MV2N4858UB, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Перечислите 10 распространенных вопросов и ответов, связанных с применением MV2N4858UB в технических решениях.

  1. What is the MV2N4858UB?

    • The MV2N4858UB is a dual-channel RS-485/RS-422 transceiver designed for high-speed communication in industrial applications.

  2. What is the operating voltage range of the MV2N4858UB?

    • The MV2N4858UB operates within a wide voltage range of 3V to 5.5V, making it suitable for various power supply configurations.

  3. What is the maximum data rate supported by the MV2N4858UB?

    • The MV2N4858UB supports data rates up to 20Mbps, enabling high-speed data transmission in demanding industrial environments.

  4. Does the MV2N4858UB support half-duplex and full-duplex communication?

    • Yes, the MV2N4858UB supports both half-duplex and full-duplex communication modes, providing flexibility in system design.

  5. What are the typical applications of the MV2N4858UB?

    • The MV2N4858UB is commonly used in industrial automation, motor control, instrumentation, and other applications requiring robust serial communication.

  6. Does the MV2N4858UB feature built-in ESD protection?

    • Yes, the MV2N4858UB integrates ESD protection, safeguarding the transceiver and connected devices from electrostatic discharge events.

  7. Is the MV2N4858UB compatible with standard RS-485 and RS-422 protocols?

    • Yes, the MV2N4858UB is fully compatible with industry-standard RS-485 and RS-422 communication protocols, ensuring interoperability with existing systems.

  8. What is the thermal shutdown feature of the MV2N4858UB?

    • The MV2N4858UB includes a thermal shutdown mechanism that activates to prevent damage due to excessive heat, enhancing system reliability.

  9. Can the MV2N4858UB operate in harsh industrial environments?

    • Yes, the MV2N4858UB is designed to withstand harsh industrial conditions, including wide temperature ranges and noisy electrical environments.

  10. Does the MV2N4858UB offer short-circuit and overvoltage protection?

    • Yes, the MV2N4858UB provides built-in short-circuit and overvoltage protection, contributing to the robustness of the overall system.