NXP USA Inc.
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
MMA5106KWR2
Посмотреть детали Таблицы данных

MMA5106KWR2

Product Overview

The MMA5106KWR2 belongs to the category of accelerometers and is designed for use in various electronic devices. This accelerometer possesses unique characteristics, comes in a specific package, and has a defined essence. The packaging/quantity details are also essential for understanding its deployment.

Basic Information

  • Category: Accelerometer
  • Use: Electronic devices
  • Characteristics: High sensitivity, low power consumption
  • Package: Surface-mount
  • Essence: Motion sensing
  • Packaging/Quantity: 100 units per reel

Specifications

The MMA5106KWR2 accelerometer features the following specifications: - Sensitivity: 800 mV/g - Operating Voltage: 2.2V - 3.6V - Operating Temperature Range: -40°C to +85°C - Output Type: Analog - Bandwidth: 1kHz

Detailed Pin Configuration

The detailed pin configuration of the MMA5106KWR2 accelerometer is as follows:

| Pin Number | Function | |------------|---------------| | 1 | VDD | | 2 | GND | | 3 | XOUT | | 4 | YOUT | | 5 | ZOUT | | 6 | ST |

Functional Features

The MMA5106KWR2 accelerometer offers the following functional features: - High sensitivity for accurate motion detection - Low power consumption for extended battery life - Analog output for easy interfacing with microcontrollers

Advantages and Disadvantages

Advantages

  • High sensitivity enables precise motion detection
  • Low power consumption prolongs battery life
  • Small form factor for easy integration into compact designs

Disadvantages

  • Limited operating temperature range may restrict certain applications
  • Analog output requires external analog-to-digital conversion

Working Principles

The MMA5106KWR2 accelerometer operates based on the principle of capacitive sensing. When subjected to acceleration, the mass inside the device causes a change in capacitance, which is then converted into an electrical signal proportional to the applied force.

Detailed Application Field Plans

The MMA5106KWR2 accelerometer is suitable for various applications, including: - Motion-activated devices - Tilt sensors - Vibration monitoring systems - Inertial measurement units

Detailed and Complete Alternative Models

Some alternative models to the MMA5106KWR2 accelerometer include: - MMA8452Q - ADXL345 - LIS3DH

In conclusion, the MMA5106KWR2 accelerometer offers high sensitivity and low power consumption, making it suitable for motion sensing applications in electronic devices. Its compact size and functional features make it a versatile choice for various applications.

Word count: 386

Перечислите 10 распространенных вопросов и ответов, связанных с применением MMA5106KWR2 в технических решениях.

  1. What is the MMA5106KWR2?

    • The MMA5106KWR2 is a low-g accelerometer sensor designed for motion and tilt sensing applications.

  2. What is the operating voltage range of the MMA5106KWR2?

    • The operating voltage range of the MMA5106KWR2 is typically between 2.4V and 3.6V.

  3. What is the output format of the MMA5106KWR2?

    • The MMA5106KWR2 provides analog outputs proportional to acceleration in the X, Y, and Z axes.

  4. What is the measurement range of the MMA5106KWR2?

    • The MMA5106KWR2 has a measurement range of ±6g, making it suitable for a wide range of motion sensing applications.

  5. Is the MMA5106KWR2 suitable for automotive applications?

    • Yes, the MMA5106KWR2 is suitable for automotive applications such as vehicle stability control and rollover detection.

  6. What is the package type of the MMA5106KWR2?

    • The MMA5106KWR2 is available in a small, surface-mount LGA package, making it suitable for compact designs.

  7. Does the MMA5106KWR2 require external calibration?

    • No, the MMA5106KWR2 is factory-calibrated and does not require external calibration.

  8. Can the MMA5106KWR2 be used in battery-powered devices?

    • Yes, the low power consumption of the MMA5106KWR2 makes it suitable for use in battery-powered devices.

  9. What are some typical applications of the MMA5106KWR2?

    • Typical applications of the MMA5106KWR2 include industrial equipment monitoring, gaming controllers, and wearable devices.

  10. Is the MMA5106KWR2 compatible with common microcontrollers?

    • Yes, the MMA5106KWR2 can interface with common microcontrollers using its analog outputs or digital interfaces such as SPI or I2C.