NXP USA Inc.
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SC16IS760IPW,128
Посмотреть детали Таблицы данных

SC16IS760IPW,128

Product Overview

Category

The SC16IS760IPW,128 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for serial communication applications.

Characteristics

  • Supports multiple serial protocols such as UART, SPI, and I2C.
  • Provides a bridge between different serial interfaces.
  • Offers high-speed data transfer rates.
  • Low power consumption.
  • Compact package size.

Package

The SC16IS760IPW,128 is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to facilitate seamless communication between devices with different serial interfaces.

Packaging/Quantity

The SC16IS760IPW,128 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 1.8V to 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data rate: Up to 5 Mbps
  • Number of channels: 1
  • GPIO pins: 8
  • FIFO buffer size: 64 bytes
  • Supported serial protocols: UART, SPI, I2C

Detailed Pin Configuration

The SC16IS760IPW,128 has a total of 20 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. SDA
  4. SCL
  5. IRQ
  6. RESET
  7. CS
  8. MOSI
  9. MISO
  10. SCLK
  11. TXD
  12. RXD
  13. CTS
  14. RTS
  15. DTR
  16. DSR
  17. DCD
  18. RI
  19. GPIO0
  20. GPIO1

Functional Features

  • UART mode: Supports full-duplex asynchronous serial communication.
  • SPI mode: Enables communication with devices using the Serial Peripheral Interface protocol.
  • I2C mode: Facilitates communication with devices utilizing the Inter-Integrated Circuit protocol.
  • Programmable baud rate generator.
  • Automatic hardware flow control.
  • Interrupt-driven architecture for efficient data handling.

Advantages and Disadvantages

Advantages

  • Versatile compatibility with multiple serial protocols.
  • Low power consumption, making it suitable for battery-powered applications.
  • Compact package size allows for space-efficient designs.
  • High-speed data transfer rates enable efficient communication.

Disadvantages

  • Limited number of channels (1 channel).
  • FIFO buffer size may be insufficient for certain high-throughput applications.

Working Principles

The SC16IS760IPW,128 acts as a bridge between different serial interfaces by converting data from one protocol to another. It utilizes internal registers and buffers to facilitate seamless data transfer. The device can be configured and controlled through software commands sent over the selected serial interface.

Detailed Application Field Plans

The SC16IS760IPW,128 finds applications in various fields, including but not limited to: - Industrial automation - Internet of Things (IoT) devices - Embedded systems - Communication modules - Robotics - Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SC16IS760IPW,128 include: - SC16IS750IPW,128 - SC16IS752IPW,128 - SC16IS762IPW,128 - MAX3107EEET+ - MCP2221-I/P

These alternative models provide comparable features and can be considered based on specific application requirements.

Word count: 511 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением SC16IS760IPW,128 в технических решениях.

Sure! Here are 10 common questions and answers related to the application of SC16IS760IPW,128 in technical solutions:

  1. Q: What is SC16IS760IPW,128? A: SC16IS760IPW,128 is a high-performance UART (Universal Asynchronous Receiver/Transmitter) bridge IC that provides a flexible way to interface serial devices to an I2C-bus or SPI bus.

  2. Q: What are the key features of SC16IS760IPW,128? A: Some key features include support for multiple protocols (UART, I2C, and SPI), programmable baud rates, FIFO buffers, interrupt capabilities, and low power consumption.

  3. Q: How can SC16IS760IPW,128 be used in technical solutions? A: SC16IS760IPW,128 can be used to enable communication between microcontrollers or other serial devices with different interfaces (UART, I2C, or SPI). It acts as a bridge, allowing seamless data transfer between these devices.

  4. Q: Can SC16IS760IPW,128 be used in both I2C and SPI modes simultaneously? A: No, SC16IS760IPW,128 can operate in either I2C mode or SPI mode, but not both at the same time.

  5. Q: What is the maximum baud rate supported by SC16IS760IPW,128? A: SC16IS760IPW,128 supports baud rates up to 5 Mbps.

  6. Q: Does SC16IS760IPW,128 have built-in FIFO buffers? A: Yes, SC16IS760IPW,128 has 64-byte receive and transmit FIFO buffers, which help in reducing CPU overhead and improving data throughput.

  7. Q: Can SC16IS760IPW,128 generate interrupts? A: Yes, SC16IS760IPW,128 supports interrupt generation for various events like data reception, transmission completion, and FIFO status.

  8. Q: What is the operating voltage range of SC16IS760IPW,128? A: SC16IS760IPW,128 operates at a voltage range of 1.8V to 3.6V.

  9. Q: Is SC16IS760IPW,128 compatible with both 5V and 3.3V systems? A: Yes, SC16IS760IPW,128 is designed to be compatible with both 5V and 3.3V systems.

  10. Q: Are there any evaluation boards or development kits available for SC16IS760IPW,128? A: Yes, NXP (the manufacturer) provides evaluation boards and development kits that can help in prototyping and testing applications using SC16IS760IPW,128.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.