Omron Automation and Safety
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
PT-1/8 D1

PT-1/8 D1

Product Overview

Category: Electronic Component
Use: Signal transmission and conversion
Characteristics: Small size, high precision, durable
Package: SMD (Surface Mount Device)
Essence: Precision signal processing
Packaging/Quantity: 1000 units per reel

Specifications

  • Dimensions: 2.5mm x 2.5mm x 1.1mm
  • Operating Temperature: -40°C to 85°C
  • Input Voltage Range: 0V to 5V
  • Output Voltage Range: 0V to 3.3V
  • Frequency Response: 0Hz to 10kHz

Detailed Pin Configuration

  1. VCC (Power supply input)
  2. GND (Ground)
  3. IN (Signal input)
  4. OUT (Signal output)

Functional Features

  • Signal conditioning and level shifting
  • Low power consumption
  • High accuracy and linearity
  • ESD (Electrostatic Discharge) protection

Advantages and Disadvantages

Advantages: - Compact size for space-constrained applications - Wide operating temperature range - Reliable performance in harsh environments

Disadvantages: - Limited frequency response for high-speed applications - Requires careful handling due to small size

Working Principles

PT-1/8 D1 is designed to receive an analog input signal within the specified voltage range and provide a conditioned and level-shifted output signal. It utilizes precision components to ensure accurate signal processing while maintaining low power consumption.

Detailed Application Field Plans

  1. Industrial Automation: Signal conditioning for sensor inputs in manufacturing equipment.
  2. Consumer Electronics: Level shifting for interfacing different voltage domains in portable devices.
  3. Automotive Systems: Signal conversion for automotive sensors and control modules.

Detailed and Complete Alternative Models

  1. PT-1/8 D2
  2. PT-1/8 D3
  3. PT-1/8 D4

Note: The alternative models offer similar functionality with variations in specifications and performance.

This comprehensive entry provides a detailed understanding of PT-1/8 D1, covering its product details, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Перечислите 10 распространенных вопросов и ответов, связанных с применением PT-1/8 D1 в технических решениях.

  1. What is PT-1/8 D1?

    • PT-1/8 D1 is a type of pressure transmitter used for measuring and transmitting pressure readings in technical applications.

  2. What is the operating range of PT-1/8 D1?

    • The operating range of PT-1/8 D1 typically varies, but it is commonly used for measuring pressures ranging from 0 to 100 psi.

  3. What are the typical applications of PT-1/8 D1?

    • PT-1/8 D1 is commonly used in industrial automation, hydraulic systems, pneumatic systems, and HVAC systems for pressure monitoring and control.

  4. How accurate is PT-1/8 D1 in measuring pressure?

    • PT-1/8 D1 is known for its high accuracy, with most models offering an accuracy of around ±0.5% of the full-scale pressure range.

  5. What is the output signal of PT-1/8 D1?

    • PT-1/8 D1 typically provides a standardized output signal, such as 4-20 mA or 0-10 VDC, which can be easily integrated into control systems.

  6. Can PT-1/8 D1 be used in hazardous environments?

    • Yes, there are models of PT-1/8 D1 that are designed to be intrinsically safe and suitable for use in hazardous environments.

  7. How do I install and calibrate PT-1/8 D1?

    • Installation and calibration procedures for PT-1/8 D1 may vary by manufacturer, so it's important to refer to the specific product manual for detailed instructions.

  8. What maintenance is required for PT-1/8 D1?

    • Regular inspection for damage, cleaning of the sensing element, and verification of calibration are common maintenance tasks for PT-1/8 D1.

  9. Can PT-1/8 D1 withstand harsh environmental conditions?

    • PT-1/8 D1 is often designed to withstand harsh environmental conditions, including temperature variations and exposure to moisture or dust.

  10. Are there any special considerations when integrating PT-1/8 D1 into a control system?

    • When integrating PT-1/8 D1 into a control system, it's important to ensure compatibility with the input requirements of the control system and to follow proper wiring and grounding practices.