Подробную информацию о продукте см. в характеристиках.
MBR2090CT
Introduction
The MBR2090CT is a diode belonging to the category of Schottky rectifier diodes. This diode is commonly used in power supply and voltage regulation applications due to its unique characteristics, packaging, and quantity.
Basic Information Overview
- Category: Schottky rectifier diode
- Use: Power supply and voltage regulation
- Characteristics: High efficiency, low forward voltage drop
- Package: TO-220AB
- Essence: Silicon Schottky barrier diode
- Packaging/Quantity: Tape and reel, 500 units per reel
Specifications
- Voltage Rating: 90V
- Current Rating: 20A
- Forward Voltage Drop: 0.75V at 10A
- Reverse Leakage Current: 50μA at 90V
Detailed Pin Configuration
The MBR2090CT has a standard TO-220AB package with three pins: anode, cathode, and the thermal pad.
Functional Features
- High efficiency due to low forward voltage drop
- Fast switching speed
- Low reverse leakage current
Advantages
- Reduced power loss
- Enhanced system efficiency
- Suitable for high-frequency applications
Disadvantages
- Higher cost compared to standard rectifier diodes
- Sensitive to temperature variations
Working Principles
The MBR2090CT operates based on the Schottky barrier principle, where the metal-semiconductor junction provides fast switching and low forward voltage drop characteristics.
Detailed Application Field Plans
- Power Supplies: Used in switch-mode power supplies for efficient energy conversion.
- Voltage Regulators: Employed in voltage regulator circuits for stable output.
- Inverters: Utilized in inverters for converting DC to AC power efficiently.
Detailed and Complete Alternative Models
- MBR20100CT: Similar specifications with a higher voltage rating of 100V.
- MBR30100CT: Higher current rating of 30A with comparable characteristics.
In conclusion, the MBR2090CT Schottky rectifier diode offers high efficiency and fast switching speed, making it suitable for various power supply and voltage regulation applications.
Word Count: 298
Перечислите 10 распространенных вопросов и ответов, связанных с применением MBR2090CT в технических решениях.
What is MBR2090CT?
- MBR2090CT is a high-voltage Schottky barrier rectifier diode designed for use in power supply and other applications.
What are the key features of MBR2090CT?
- The key features of MBR2090CT include a high current capability, low forward voltage drop, and fast switching speed.
What are the typical applications of MBR2090CT?
- Typical applications of MBR2090CT include power factor correction, switch mode power supplies, and freewheeling diodes.
What is the maximum voltage rating of MBR2090CT?
- The maximum repetitive reverse voltage (VRRM) of MBR2090CT is 90 volts.
What is the maximum forward current rating of MBR2090CT?
- The maximum forward continuous current (IF) of MBR2090CT is typically 20 amperes.
What is the operating temperature range of MBR2090CT?
- MBR2090CT is designed to operate within a temperature range of -65°C to +175°C.
Does MBR2090CT require a heatsink for operation?
- Depending on the application and operating conditions, a heatsink may be required to ensure proper thermal management.
Is MBR2090CT RoHS compliant?
- Yes, MBR2090CT is compliant with the Restriction of Hazardous Substances (RoHS) directive.
Can MBR2090CT be used in automotive applications?
- MBR2090CT is not specifically designed or qualified for automotive use and should not be used in automotive applications.
Where can I find detailed technical specifications and application notes for MBR2090CT?
- Detailed technical specifications and application notes for MBR2090CT can be found in the product datasheet provided by the manufacturer.