Подробную информацию о продукте см. в характеристиках.
MC4558CP
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Dual High-Gain Operational Amplifier
- Package: DIP-8 (Dual In-Line Package with 8 pins)
- Essence: The MC4558CP is a dual operational amplifier that provides high gain and low distortion. It is commonly used in audio applications, such as amplifiers, mixers, and audio signal processing.
- Packaging/Quantity: The MC4558CP is typically sold in packs of 10 or more.
Specifications
- Supply Voltage: ±5V to ±18V
- Input Offset Voltage: 2mV (maximum)
- Input Bias Current: 30nA (maximum)
- Input Voltage Range: ±12V
- Output Voltage Swing: ±13V
- Gain Bandwidth Product: 3MHz
- Slew Rate: 0.5V/µs
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The MC4558CP has a standard DIP-8 pin configuration:
__ __
OUT1 | 1 8 | VCC+
IN1- | 2 7 | OUT2
IN1+ | 3 6 | IN2-
VCC-| 4 5 | IN2+
¯¯ ¯¯
Functional Features
- Dual operational amplifier with high gain and low distortion.
- Wide supply voltage range allows for flexibility in various applications.
- Low input offset voltage and bias current ensure accurate signal amplification.
- High output voltage swing enables compatibility with different load requirements.
- Good stability and frequency response characteristics make it suitable for audio applications.
Advantages and Disadvantages
Advantages: - High gain and low distortion for accurate signal amplification. - Wide supply voltage range allows for versatile use. - Good stability and frequency response characteristics. - Suitable for audio applications.
Disadvantages: - Limited output current capability. - Not suitable for high-speed applications.
Working Principles
The MC4558CP is based on a differential amplifier configuration. It consists of two operational amplifiers in a single package. Each amplifier has a non-inverting input (IN1+ and IN2+) and an inverting input (IN1- and IN2-). The amplifiers amplify the voltage difference between the inputs and provide an amplified output signal.
Detailed Application Field Plans
The MC4558CP is commonly used in various audio-related applications, including: - Audio amplifiers - Mixers - Audio signal processing circuits - Active filters - Tone control circuits
Alternative Models
Some alternative models to the MC4558CP include: - LM358 - TL072 - NE5532 - LM833
These alternatives offer similar functionality and can be used as replacements depending on specific requirements.
Note: This entry provides a basic overview of the MC4558CP operational amplifier. For more detailed information, please refer to the datasheet provided by the manufacturer.
Перечислите 10 распространенных вопросов и ответов, связанных с применением MC4558CP в технических решениях.
Sure! Here are 10 common questions and answers related to the application of MC4558CP in technical solutions:
Q: What is MC4558CP? A: MC4558CP is a dual operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.
Q: What are the key features of MC4558CP? A: MC4558CP features low input bias current, high slew rate, wide bandwidth, and low noise, making it suitable for audio amplification, signal conditioning, and other precision applications.
Q: What is the power supply voltage range for MC4558CP? A: The power supply voltage range for MC4558CP typically ranges from ±4V to ±18V.
Q: Can MC4558CP be used as a voltage follower? A: Yes, MC4558CP can be configured as a voltage follower by connecting the output to the inverting input, which provides unity gain and high input impedance.
Q: How can I use MC4558CP for audio amplification? A: MC4558CP can be used as an audio amplifier by configuring it in an inverting or non-inverting amplifier configuration with appropriate feedback resistors.
Q: Is MC4558CP suitable for low-power applications? A: Yes, MC4558CP has a low quiescent current consumption, making it suitable for low-power applications where power efficiency is important.
Q: Can MC4558CP operate at high frequencies? A: Yes, MC4558CP has a wide bandwidth and high slew rate, allowing it to operate at high frequencies, making it suitable for applications such as active filters and oscillators.
Q: What is the input offset voltage of MC4558CP? A: The input offset voltage of MC4558CP is typically in the range of a few millivolts, which can be minimized using external offset nulling techniques if required.
Q: Can MC4558CP drive capacitive loads? A: Yes, MC4558CP has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.
Q: Are there any recommended application circuits available for MC4558CP? A: Yes, the datasheet of MC4558CP provides various application circuits and example designs that can be used as a reference for different applications.
Please note that these answers are general and may vary depending on specific circuit requirements and design considerations.