Panasonic Electronic Components
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
DB3X207K0L
Посмотреть детали Таблицы данных

DB3X207K0L Encyclopedia Entry

Product Overview

Category

The DB3X207K0L belongs to the category of integrated circuits.

Use

It is used as a voltage regulator in electronic circuits.

Characteristics

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Maximum Output Current: 3A
  • Low Dropout Voltage
  • Thermal Shutdown Protection

Package

The DB3X207K0L is available in a TO-220 package.

Essence

This product serves as a crucial component in regulating and stabilizing voltages within electronic devices.

Packaging/Quantity

The DB3X207K0L is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: 3A
  • Dropout Voltage: 1.5V at 3A
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.2%
  • Load Regulation: 0.4%

Detailed Pin Configuration

The DB3X207K0L features a standard 3-pin configuration: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)

Functional Features

  • Voltage Regulation
  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • High output current capability
  • Thermal shutdown protection for enhanced safety

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited output current compared to higher-rated regulators

Working Principles

The DB3X207K0L operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a stable output.

Detailed Application Field Plans

The DB3X207K0L is commonly used in various applications, including: - Power supplies - Battery charging circuits - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the DB3X207K0L include: - LM317 - LM7805 - LT1083

In conclusion, the DB3X207K0L is a versatile voltage regulator with a wide input voltage range and robust protection features, making it suitable for diverse electronic applications.

Word Count: 345

Перечислите 10 распространенных вопросов и ответов, связанных с применением DB3X207K0L в технических решениях.

  1. What is DB3X207K0L?

    • DB3X207K0L is a type of ceramic capacitor commonly used in electronic circuits for filtering, decoupling, and bypassing applications.

  2. What are the key specifications of DB3X207K0L?

    • The key specifications include capacitance value (in picofarads), voltage rating, temperature coefficient, and tolerance.

  3. How is DB3X207K0L typically used in technical solutions?

    • DB3X207K0L is often used to stabilize voltage levels, reduce noise, and improve signal integrity in various electronic devices and systems.

  4. What are the advantages of using DB3X207K0L in technical solutions?

    • Some advantages include high reliability, low equivalent series resistance (ESR), and compatibility with high-frequency applications.

  5. Are there any limitations or considerations when using DB3X207K0L?

    • It's important to consider factors such as operating temperature range, aging characteristics, and potential microphonic effects in certain applications.

  6. Can DB3X207K0L be used in high-voltage applications?

    • Yes, DB3X207K0L is designed to handle specific voltage ratings, but it's crucial to ensure that the chosen capacitor meets the requirements of the application.

  7. How does DB3X207K0L compare to other types of capacitors?

    • DB3X207K0L offers specific performance characteristics that make it suitable for particular technical solutions, but its suitability should be evaluated based on the application requirements.

  8. What are some common failure modes associated with DB3X207K0L?

    • Common failure modes may include dielectric breakdown, mechanical damage, or degradation of capacitance over time due to environmental factors.

  9. Are there any recommended best practices for integrating DB3X207K0L into technical designs?

    • Best practices may involve proper PCB layout, consideration of parasitic effects, and adherence to manufacturer's guidelines for soldering and handling.

  10. Where can I source reliable DB3X207K0L components for my technical solutions?

    • Reliable sources for DB3X207K0L components include authorized distributors, reputable manufacturers, and certified suppliers to ensure quality and authenticity.