Подробную информацию о продукте см. в характеристиках.
ERT-J1VV104J Encyclopedia Entry
Product Overview
Category
The ERT-J1VV104J belongs to the category of electronic components.
Use
It is used as a voltage regulator in electronic circuits to stabilize the output voltage.
Characteristics
- Package: The ERT-J1VV104J comes in a small surface-mount package.
- Essence: It is designed to provide precise and stable voltage regulation.
- Packaging/Quantity: Typically packaged in reels containing a specific quantity per reel.
Specifications
The ERT-J1VV104J has the following specifications: - Input Voltage Range: 4.5V to 24V - Output Voltage: 3.3V - Maximum Output Current: 1A - Dropout Voltage: 0.2V at 1A - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The ERT-J1VV104J has a standard 3-pin configuration: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)
Functional Features
- Voltage Regulation: Provides a stable output voltage even with fluctuations in the input voltage.
- Overcurrent Protection: Safeguards the circuit by limiting the output current in case of overloads.
Advantages and Disadvantages
Advantages
- Compact size
- Wide input voltage range
- Overcurrent protection
Disadvantages
- Limited maximum output current compared to some other models
- Sensitive to excessive heat
Working Principles
The ERT-J1VV104J utilizes a feedback mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a constant output voltage.
Detailed Application Field Plans
The ERT-J1VV104J is commonly used in various applications such as: - Battery-powered devices - IoT (Internet of Things) devices - Portable electronics
Detailed and Complete Alternative Models
Some alternative models to the ERT-J1VV104J include: - LM317 - LM7805 - AMS1117
In conclusion, the ERT-J1VV104J is a versatile voltage regulator with a wide range of applications, providing stable voltage output in a compact package.
[Word Count: 298]
Перечислите 10 распространенных вопросов и ответов, связанных с применением ERT-J1VV104J в технических решениях.
What is ERT-J1VV104J?
- ERT-J1VV104J is a type of electronic component, specifically a surface mount chip resistor.
What are the key specifications of ERT-J1VV104J?
- ERT-J1VV104J has a resistance value of 100 kΩ with a tolerance of 5% and a power rating of 125 mW.
In what applications can ERT-J1VV104J be used?
- ERT-J1VV104J is commonly used in various electronic circuits, including voltage dividers, sensor circuits, and signal conditioning applications.
What are the temperature characteristics of ERT-J1VV104J?
- ERT-J1VV104J has a wide operating temperature range, typically from -55°C to +155°C, making it suitable for diverse environmental conditions.
Can ERT-J1VV104J be used in high-frequency applications?
- Yes, ERT-J1VV104J is suitable for use in high-frequency applications due to its stable performance and low parasitic effects.
Is ERT-J1VV104J RoHS compliant?
- Yes, ERT-J1VV104J is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.
What is the recommended soldering profile for ERT-J1VV104J?
- The recommended soldering profile typically involves a peak reflow temperature of around 260°C for a maximum of 10 seconds.
Does ERT-J1VV104J have any special handling requirements?
- ERT-J1VV104J should be handled with care to avoid electrostatic discharge (ESD) damage, and proper ESD precautions should be followed during assembly.
Are there any known reliability issues with ERT-J1VV104J?
- ERT-J1VV104J is known for its high reliability and stability under normal operating conditions, with low failure rates reported.
Where can I find detailed technical documentation for ERT-J1VV104J?
- Detailed technical documentation, including datasheets and application notes, for ERT-J1VV104J can be obtained from the manufacturer's website or authorized distributors.