Power Integrations
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
LNK362GN
Посмотреть детали Таблицы данных

LNK362GN

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range - Over-temperature protection - Over-voltage protection - Under-voltage lockout

Package: DIP-7 (Dual In-line Package)

Essence: The LNK362GN is a power management IC designed for low power applications. It provides efficient power conversion and protection features in a compact package.

Packaging/Quantity: The LNK362GN is available in a DIP-7 package, which contains one IC per unit.

Specifications

The LNK362GN has the following specifications:

  • Input Voltage Range: 85V AC to 265V AC
  • Output Voltage: 5V DC
  • Output Current: Up to 0.5A
  • Efficiency: Up to 85%
  • Operating Temperature Range: -40°C to 125°C
  • Storage Temperature Range: -55°C to 150°C

Pin Configuration

The LNK362GN has a DIP-7 package with the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground
  3. BP - Bypass pin for frequency jittering
  4. FB - Feedback pin for output voltage regulation
  5. EN/UVLO - Enable/Undervoltage Lockout pin
  6. D - Drain pin for power switching
  7. S - Source pin for power switching

Functional Features

The LNK362GN offers the following functional features:

  1. Power Conversion: Efficiently converts high voltage AC input to low voltage DC output.
  2. Over-Temperature Protection: Automatically shuts down the IC if the temperature exceeds a safe limit.
  3. Over-Voltage Protection: Safeguards the connected circuitry by limiting the output voltage in case of a surge.
  4. Under-Voltage Lockout: Prevents operation when the input voltage falls below a specified threshold.

Advantages and Disadvantages

Advantages: - Low power consumption - High efficiency - Compact size - Wide input voltage range - Over-temperature and over-voltage protection

Disadvantages: - Limited output current capacity (up to 0.5A)

Working Principles

The LNK362GN utilizes a flyback converter topology to achieve efficient power conversion. It operates by switching the power transistor on and off at high frequency, which allows for energy transfer from the primary to the secondary side of the transformer. The feedback mechanism ensures stable output voltage regulation.

Detailed Application Field Plans

The LNK362GN is suitable for various low power applications, including but not limited to:

  1. LED lighting systems
  2. Home appliances
  3. Battery chargers
  4. IoT devices
  5. Industrial control systems

Detailed and Complete Alternative Models

  1. LNK364GN
  2. LNK365GN
  3. LNK366GN
  4. LNK367GN
  5. LNK368GN

These alternative models offer similar functionality and characteristics to the LNK362GN, providing flexibility in design choices.

In conclusion, the LNK362GN is a power management IC that offers efficient power conversion, protection features, and compact size. Its wide input voltage range and low power consumption make it suitable for various low power applications. However, its limited output current capacity may restrict its use in higher power applications.

Перечислите 10 распространенных вопросов и ответов, связанных с применением LNK362GN в технических решениях.

Sure! Here are 10 common questions and answers related to the application of LNK362GN in technical solutions:

  1. Q: What is LNK362GN? A: LNK362GN is a highly integrated, energy-efficient, offline switcher IC designed for low-power applications.

  2. Q: What are the typical applications of LNK362GN? A: LNK362GN is commonly used in applications such as LED lighting, smart home devices, industrial controls, and power adapters.

  3. Q: What is the input voltage range supported by LNK362GN? A: LNK362GN supports an input voltage range of 85VAC to 265VAC.

  4. Q: What is the output power range that LNK362GN can handle? A: LNK362GN can handle output power ranging from a few watts up to 12 watts.

  5. Q: Does LNK362GN require an external MOSFET? A: No, LNK362GN integrates a high-voltage MOSFET, eliminating the need for an external one.

  6. Q: Can LNK362GN operate in a wide temperature range? A: Yes, LNK362GN is designed to operate reliably in a temperature range of -40°C to +150°C.

  7. Q: Does LNK362GN have built-in protection features? A: Yes, LNK362GN includes features like thermal shutdown, cycle-by-cycle current limit, and output short-circuit protection.

  8. Q: Is LNK362GN compliant with safety standards? A: Yes, LNK362GN is compliant with various safety standards such as UL, CE, and ENEC.

  9. Q: Can LNK362GN be easily integrated into existing designs? A: Yes, LNK362GN is available in a compact SMD package and can be easily integrated into existing designs.

  10. Q: Are evaluation boards or reference designs available for LNK362GN? A: Yes, Power Integrations provides evaluation boards and reference designs to help engineers quickly implement LNK362GN in their applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases.