Semtech Corporation
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
JANTX1N4463US
Посмотреть детали Таблицы данных

JANTX1N4463US

Product Overview

Category

The JANTX1N4463US belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification and signal demodulation.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High surge current capability

Package

The JANTX1N4463US is typically available in a DO-41 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum repetitive peak reverse voltage: 1000V
  • Average rectified forward current at 75°C: 1A
  • Non-repetitive peak surge current: 30A
  • Operating junction temperature range: -65°C to +175°C

Detailed Pin Configuration

The JANTX1N4463US has two pins, an anode and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Rectification of AC to DC
  • Signal demodulation
  • Protection against reverse voltage

Advantages and Disadvantages

Advantages

  • High reliability
  • Low forward voltage drop
  • Fast switching speed

Disadvantages

  • Limited maximum repetitive peak reverse voltage compared to some other diodes
  • Relatively low average rectified forward current compared to higher power diodes

Working Principles

The JANTX1N4463US operates based on the principle of creating a one-way flow of current when it is forward-biased, allowing only positive half cycles of an AC signal to pass through.

Detailed Application Field Plans

Power Supplies

The diode can be used in power supply circuits to convert AC to DC, providing a stable source of power for various electronic devices.

Signal Demodulation

In communication systems, the diode can be utilized for demodulating amplitude-modulated (AM) signals, extracting the original information from the modulated carrier wave.

Overvoltage Protection

It can also be employed in circuits to protect sensitive components from damage due to reverse voltage spikes.

Detailed and Complete Alternative Models

  • 1N4007
  • 1N5408
  • 1N5819
  • 1N4937

Note: The alternative models listed above are similar diodes that can be used as substitutes for the JANTX1N4463US in various applications.

This comprehensive entry provides detailed information about the JANTX1N4463US semiconductor diode, including its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Перечислите 10 распространенных вопросов и ответов, связанных с применением JANTX1N4463US в технических решениях.

Sure, here are 10 common questions and answers related to the application of JANTX1N4463US:

  1. What is the JANTX1N4463US diode used for?

    • The JANTX1N4463US is a high-reliability diode commonly used in military and aerospace applications due to its rugged construction and high performance.

  2. What are the key specifications of the JANTX1N4463US diode?

    • The JANTX1N4463US diode has a maximum repetitive peak reverse voltage of 200V, a forward current of 1A, and a fast recovery time.

  3. In what type of circuits can the JANTX1N4463US diode be used?

    • The JANTX1N4463US diode can be used in various circuits such as rectifiers, clippers, and voltage multipliers due to its fast recovery time and high reliability.

  4. What are the temperature specifications for the JANTX1N4463US diode?

    • The JANTX1N4463US diode is designed to operate within a wide temperature range, typically from -65°C to +175°C, making it suitable for harsh environments.

  5. Can the JANTX1N4463US diode handle high surge currents?

    • Yes, the JANTX1N4463US diode is capable of handling high surge currents, making it suitable for applications where transient overloads may occur.

  6. Is the JANTX1N4463US diode radiation tolerant?

    • Yes, the JANTX1N4463US diode is designed to withstand radiation exposure, making it suitable for use in space and other high-radiation environments.

  7. What are the packaging options available for the JANTX1N4463US diode?

    • The JANTX1N4463US diode is available in various package types including axial-lead, surface mount, and chip form to accommodate different application requirements.

  8. Are there any specific application notes or guidelines for using the JANTX1N4463US diode?

    • Yes, the manufacturer provides detailed application notes and guidelines for using the JANTX1N4463US diode in different technical solutions, ensuring proper integration and performance.

  9. Can the JANTX1N4463US diode be used in high-frequency applications?

    • Yes, the JANTX1N4463US diode's fast recovery time makes it suitable for high-frequency applications such as switching power supplies and RF circuits.

  10. Where can I find reliable sources for purchasing the JANTX1N4463US diode?

    • The JANTX1N4463US diode can be sourced from authorized distributors and manufacturers who specialize in providing high-reliability components for technical solutions.