Semtech Corporation
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SC621ULTRT
Посмотреть детали Таблицы данных

SC621ULTRT

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low Dropout Voltage Regulator - Ultra-Low Quiescent Current - High Output Current Capability - Small Package Size - Wide Input Voltage Range

Package: SOT-23-5

Essence: SC621ULTRT is a low dropout voltage regulator designed for power management applications. It provides a stable output voltage with minimal power dissipation.

Packaging/Quantity: SC621ULTRT is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 1.5µA (typical)
  • Output Current: Up to 150mA
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

SC621ULTRT has a SOT-23-5 package with the following pin configuration:

  1. GND (Ground)
  2. VIN (Input Voltage)
  3. EN (Enable)
  4. VOUT (Output Voltage)
  5. BYP (Bypass Capacitor)

Functional Features

  • Low dropout voltage allows operation with small input-output voltage differentials.
  • Ultra-low quiescent current minimizes power consumption during standby or idle modes.
  • High output current capability enables driving various loads.
  • Excellent line and load regulation ensures stable output voltage under varying conditions.
  • Thermal shutdown and current limit protection features enhance device reliability.

Advantages

  • Compact package size makes it suitable for space-constrained applications.
  • Wide input voltage range allows compatibility with different power sources.
  • Low dropout voltage minimizes power dissipation and extends battery life.
  • Ultra-low quiescent current reduces standby power consumption.
  • High output current capability enables driving power-hungry components.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • SOT-23-5 package may require additional thermal management for certain operating conditions.
  • Lack of adjustable output voltage limits flexibility in some applications.

Working Principles

SC621ULTRT is a linear voltage regulator that regulates the output voltage by adjusting the resistance between the input and output terminals. It uses a pass transistor to control the voltage drop across the regulator, ensuring a stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

SC621ULTRT can be used in various applications, including but not limited to: 1. Battery-powered devices 2. Portable electronics 3. IoT (Internet of Things) devices 4. Wearable devices 5. Automotive electronics 6. Industrial control systems

Detailed and Complete Alternative Models

  1. SC623ULTRT: Similar specifications with an adjustable output voltage feature.
  2. SC622ULTRT: Higher output current capability with a slightly larger package size.
  3. SC620ULTRT: Lower output current capability with a smaller package size.

These alternative models provide options based on specific application requirements and design constraints.

Word count: 410 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением SC621ULTRT в технических решениях.

Sure! Here are 10 common questions and answers related to the application of SC621ULTRT in technical solutions:

  1. Q: What is SC621ULTRT? A: SC621ULTRT is a specific model of a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of SC621ULTRT? A: Some key features of SC621ULTRT include high efficiency, low quiescent current, multiple voltage outputs, and protection mechanisms.

  3. Q: What technical solutions can SC621ULTRT be used in? A: SC621ULTRT can be used in a wide range of applications, including portable devices, IoT devices, industrial equipment, and automotive systems.

  4. Q: How does SC621ULTRT help in power management? A: SC621ULTRT provides efficient power conversion, regulation, and distribution capabilities, ensuring stable and reliable power supply to various components in a system.

  5. Q: Can SC621ULTRT handle different input voltages? A: Yes, SC621ULTRT supports a wide input voltage range, allowing it to work with different power sources or batteries.

  6. Q: Does SC621ULTRT offer any protection features? A: Yes, SC621ULTRT incorporates protection features such as overvoltage protection, undervoltage lockout, thermal shutdown, and short-circuit protection.

  7. Q: Is SC621ULTRT easy to integrate into existing designs? A: Yes, SC621ULTRT comes in a compact package and offers a simple interface, making it relatively easy to integrate into existing designs.

  8. Q: Can SC621ULTRT operate in harsh environments? A: Yes, SC621ULTRT is designed to operate reliably in a wide temperature range and can withstand certain levels of vibration and humidity.

  9. Q: Are there any evaluation tools available for SC621ULTRT? A: Yes, the manufacturer provides evaluation boards and software tools to help engineers assess the performance and functionality of SC621ULTRT.

  10. Q: Where can I find more detailed information about SC621ULTRT? A: You can refer to the datasheet, application notes, and technical documentation provided by the manufacturer for comprehensive information on SC621ULTRT.