Подробную информацию о продукте см. в характеристиках.
IME08-04NPSZW2K
Product Overview
Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact size, low power consumption
Package: Surface Mount
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 0.8V to 5.5V
- Output Current: 4A
- Dropout Voltage: 330mV at 4A
- Operating Temperature: -40°C to 125°C
- Package Type: DFN-12 (3mm x 4mm)
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- NC (No Connection)
- NC (No Connection)
- FB (Feedback)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- VOUT (Output Voltage)
- VOUT (Output Voltage)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- Adjustable output voltage
- Overcurrent and thermal protection
- Low dropout voltage
- Enable pin for power sequencing
Advantages and Disadvantages
Advantages: - High efficiency - Compact size - Wide operating temperature range - Overcurrent and thermal protection
Disadvantages: - Limited output current compared to some alternatives - Not suitable for high-power applications
Working Principles
The IME08-04NPSZW2K is a voltage regulator that takes an input voltage within the specified range and provides a stable output voltage. It uses internal circuitry to regulate the output voltage and protect against overcurrent and thermal issues.
Detailed Application Field Plans
This component is commonly used in various electronic devices such as portable electronics, automotive systems, industrial equipment, and telecommunications devices. Its compact size and efficient performance make it suitable for applications where space and power consumption are critical factors.
Detailed and Complete Alternative Models
- IME08-05NPSZW2K
- Similar specifications with a higher output voltage range
- IME08-03NPSZW2K
- Similar specifications with a lower output voltage range
- IME12-04NPSZW2K
- Higher output current capacity with similar input and output voltage ranges
Note: The alternative models listed above are from the same product line and offer similar functionality with slight variations in specifications.
This completes the entry for IME08-04NPSZW2K according to the provided structure.
Перечислите 10 распространенных вопросов и ответов, связанных с применением IME08-04NPSZW2K в технических решениях.
What is IME08-04NPSZW2K?
- IME08-04NPSZW2K is a compact, high-performance pressure sensor designed for industrial applications.
What is the operating voltage range of IME08-04NPSZW2K?
- The operating voltage range of IME08-04NPSZW2K is typically 12-30V DC.
What is the output signal of IME08-04NPSZW2K?
- IME08-04NPSZW2K provides a 4-20mA analog output signal proportional to the measured pressure.
What is the pressure range that IME08-04NPSZW2K can measure?
- IME08-04NPSZW2K can measure pressure in the range of 0 to 4 bar.
Is IME08-04NPSZW2K suitable for use in harsh environments?
- Yes, IME08-04NPSZW2K is designed to withstand harsh industrial environments and has a high level of resistance to vibration and shock.
What is the accuracy of IME08-04NPSZW2K?
- IME08-04NPSZW2K offers high accuracy with a typical error of less than 0.5% of the full-scale output.
Can IME08-04NPSZW2K be used for both liquid and gas pressure measurement?
- Yes, IME08-04NPSZW2K is suitable for measuring both liquid and gas pressures within its specified range.
Does IME08-04NPSZW2K require any special calibration before use?
- IME08-04NPSZW2K comes factory calibrated and generally does not require additional calibration before use.
What is the response time of IME08-04NPSZW2K?
- IME08-04NPSZW2K has a fast response time, typically less than 5 milliseconds.
Can IME08-04NPSZW2K be integrated with PLCs or control systems?
- Yes, IME08-04NPSZW2K can be easily integrated with PLCs and various control systems using its standard 4-20mA output signal.