STMicroelectronics
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
MC1558N
Посмотреть детали Таблицы данных

MC1558N

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: Dual Operational Amplifier
  • Package: DIP-8 (Dual In-line Package with 8 pins)
  • Essence: The MC1558N is a dual operational amplifier that provides high gain, low input bias current, and low offset voltage. It is commonly used in audio applications, instrumentation, and control systems.
  • Packaging/Quantity: The MC1558N is typically sold in tubes or reels containing multiple units.

Specifications

  • Supply Voltage: ±5V to ±18V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 20nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Slew Rate: 0.5V/µs (typical)
  • Input Common Mode Range: -0.3V to Vcc-1.5V
  • Output Voltage Swing: -Vs+1.5V to Vs-1.5V

Pin Configuration

The MC1558N has a DIP-8 package with the following pin configuration:

___________ Vcc | 1 8 | Vs+ Vin-| 2 7 | Out2 Vin+| 3 6 | Out1 Gnd | 4 5 | Vs- |__________|

Functional Features

  • High gain: The MC1558N offers a high open-loop voltage gain, making it suitable for amplification purposes.
  • Low input bias current: With a maximum input bias current of 20nA, the MC1558N minimizes the impact of input currents on circuit performance.
  • Low offset voltage: The amplifier has a low input offset voltage of 2mV, reducing errors in signal amplification.
  • Wide supply voltage range: It can operate with a supply voltage ranging from ±5V to ±18V, providing flexibility in various applications.

Advantages and Disadvantages

Advantages: - High gain and bandwidth - Low input bias current - Low offset voltage - Wide supply voltage range

Disadvantages: - Limited output voltage swing - Relatively slow slew rate

Working Principles

The MC1558N is based on the operational amplifier (op-amp) architecture. It consists of two independent op-amps within a single package. Each op-amp has differential inputs (Vin+ and Vin-) and a single-ended output (Out1 and Out2). The op-amp amplifies the voltage difference between its inputs and produces an amplified output signal.

Detailed Application Field Plans

The MC1558N is commonly used in the following application fields:

  1. Audio Amplification: It can be used in audio systems, such as preamplifiers and headphone amplifiers, to amplify weak audio signals.
  2. Instrumentation: The MC1558N is suitable for precision measurement instruments due to its low input bias current and offset voltage.
  3. Control Systems: It can be employed in control circuits to amplify sensor signals and drive actuators.

Alternative Models

Here are some alternative models that offer similar functionality to the MC1558N:

  1. LM358: Dual operational amplifier with similar specifications and pin configuration.
  2. TL072: Dual JFET-input operational amplifier with higher bandwidth and lower noise.
  3. NE5532: Dual high-performance audio operational amplifier with low distortion and noise.

These alternatives can be considered based on specific requirements and design considerations.

Word count: 346 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением MC1558N в технических решениях.

Sure! Here are 10 common questions and answers related to the application of MC1558N in technical solutions:

  1. Q: What is MC1558N? A: MC1558N is a dual operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.

  2. Q: What are the key features of MC1558N? A: Some key features of MC1558N include low input offset voltage, high gain bandwidth product, wide supply voltage range, and low power consumption.

  3. Q: What are the typical applications of MC1558N? A: MC1558N can be used in audio amplifiers, signal conditioning circuits, active filters, instrumentation amplifiers, and other general-purpose amplification tasks.

  4. Q: What is the maximum supply voltage for MC1558N? A: The maximum supply voltage for MC1558N is typically around ±18V.

  5. Q: What is the input offset voltage of MC1558N? A: The input offset voltage of MC1558N is typically in the range of a few millivolts.

  6. Q: Can MC1558N operate with a single power supply? A: Yes, MC1558N can operate with a single power supply as long as it is within the specified supply voltage range.

  7. Q: What is the output voltage swing of MC1558N? A: The output voltage swing of MC1558N is typically close to the supply voltage limits.

  8. Q: Is MC1558N suitable for low-power applications? A: Yes, MC1558N is designed to be low-power and can be used in battery-powered devices or other low-power applications.

  9. Q: Does MC1558N require external compensation? A: No, MC1558N is internally compensated and does not require any external components for stability.

  10. Q: Can MC1558N operate in high-temperature environments? A: MC1558N has a wide operating temperature range and can operate reliably in high-temperature environments up to a certain limit, typically around 125°C.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.