Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
STW56N65M2-4

STW56N65M2-4

Introduction

The STW56N65M2-4 is a power MOSFET belonging to the category of semiconductor devices. This device is widely used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Power MOSFET
  • Use: The STW56N65M2-4 is used as a switching device in power supply, motor control, and other high-power applications.
  • Characteristics: This MOSFET offers low on-state resistance, high switching speed, and low gate charge, making it suitable for high-efficiency power conversion.
  • Package: The STW56N65M2-4 is typically available in a TO-247 package.
  • Essence: It serves as a critical component in power electronics, enabling efficient power management and control.
  • Packaging/Quantity: The device is commonly packaged individually and sold in quantities based on the application requirements.

Specifications

  • Voltage Rating: 650V
  • Current Rating: 56A
  • On-State Resistance (RDS(on)): 0.065 Ohms
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 150°C
  • Package Type: TO-247

Detailed Pin Configuration

The STW56N65M2-4 features a standard pin configuration with three pins: Gate (G), Drain (D), and Source (S).

Functional Features

  • Low On-State Resistance: Enables minimal power dissipation and high efficiency.
  • High Switching Speed: Facilitates rapid switching in power electronic circuits.
  • Low Gate Charge: Allows for efficient control of the MOSFET.

Advantages and Disadvantages

Advantages

  • High Efficiency: Due to low on-state resistance and fast switching speed.
  • Reliable Performance: Ensures stable operation in demanding applications.
  • Versatile: Suitable for a wide range of power electronics designs.

Disadvantages

  • Sensitivity to Overvoltage: Requires proper protection against voltage spikes.
  • Heat Dissipation: May require additional thermal management in high-power applications.

Working Principles

The STW56N65M2-4 operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. By modulating the gate voltage, the MOSFET can efficiently switch high currents in power circuits.

Detailed Application Field Plans

The STW56N65M2-4 finds extensive use in the following applications: - Switched-Mode Power Supplies (SMPS) - Motor Drives and Control Systems - Renewable Energy Systems - Uninterruptible Power Supplies (UPS) - Electric Vehicle Powertrains

Detailed and Complete Alternative Models

  • Infineon IPP056N06N3 G
  • ON Semiconductor NCP13992MNTXG
  • Vishay SIHP56N60E-E3

In conclusion, the STW56N65M2-4 power MOSFET offers high-performance characteristics and reliability, making it an essential component in various power electronics applications.

Word Count: 411

Перечислите 10 распространенных вопросов и ответов, связанных с применением STW56N65M2-4 в технических решениях.

  1. What is the maximum drain-source voltage for STW56N65M2-4?

    • The maximum drain-source voltage for STW56N65M2-4 is 650V.
  2. What is the continuous drain current rating for STW56N65M2-4?

    • The continuous drain current rating for STW56N65M2-4 is 56A.
  3. What is the on-resistance (RDS(on)) of STW56N65M2-4?

    • The on-resistance (RDS(on)) of STW56N65M2-4 is typically 0.038 ohms.
  4. What is the gate threshold voltage for STW56N65M2-4?

    • The gate threshold voltage for STW56N65M2-4 is typically 3V.
  5. What is the power dissipation of STW56N65M2-4?

    • The power dissipation of STW56N65M2-4 is 300W.
  6. What are the typical applications for STW56N65M2-4?

    • Typical applications for STW56N65M2-4 include switch mode power supplies, motor control, and high power lighting.
  7. Is STW56N65M2-4 suitable for automotive applications?

    • Yes, STW56N65M2-4 is suitable for automotive applications.
  8. Does STW56N65M2-4 have built-in protection features?

    • STW56N65M2-4 does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.
  9. What is the operating temperature range for STW56N65M2-4?

    • The operating temperature range for STW56N65M2-4 is -55°C to 150°C.
  10. Is STW56N65M2-4 RoHS compliant?

    • Yes, STW56N65M2-4 is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.