STMicroelectronics
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
TDA7240AH
Посмотреть детали Таблицы данных

TDA7240AH

Product Overview

Category

TDA7240AH belongs to the category of integrated audio amplifier circuits.

Use

It is primarily used for amplifying audio signals in various electronic devices such as radios, televisions, and portable audio players.

Characteristics

  • High-quality audio amplification
  • Low distortion
  • Wide frequency response range
  • Compact size
  • Low power consumption

Package

TDA7240AH is available in a compact 9-pin single in-line package (SIP).

Essence

The essence of TDA7240AH lies in its ability to provide high-quality audio amplification with low distortion and wide frequency response, making it suitable for various audio applications.

Packaging/Quantity

TDA7240AH is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Supply voltage: 8V - 18V
  • Output power: 20W (max)
  • Total harmonic distortion: <0.5%
  • Frequency response: 20Hz - 20kHz
  • Input impedance: 30kΩ
  • Output impedance: 4Ω
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. IN+: Non-inverting input
  3. IN-: Inverting input
  4. GND: Ground
  5. OUT: Amplified audio output
  6. BYPASS: Bypass capacitor connection
  7. MUTE: Mute control input
  8. ST-BY: Standby control input
  9. VEE: Negative power supply input

Functional Features

  • High gain audio amplification
  • Built-in mute and standby modes for power saving
  • Short-circuit and thermal protection
  • External bypass capacitor for improved stability
  • Low external component count

Advantages and Disadvantages

Advantages

  • High-quality audio amplification with low distortion
  • Wide frequency response range for accurate sound reproduction
  • Compact size allows for easy integration into various devices
  • Low power consumption for energy efficiency

Disadvantages

  • Limited output power compared to higher wattage amplifiers
  • Requires additional external components for optimal performance

Working Principles

TDA7240AH operates as a class AB audio amplifier. It amplifies the input audio signal using a combination of voltage and current amplification stages. The amplified signal is then delivered to the output, driving the connected speaker or audio device.

Detailed Application Field Plans

TDA7240AH finds applications in various electronic devices, including: 1. Portable audio players 2. Car audio systems 3. Home theater systems 4. Multimedia speakers 5. Television sets 6. Radios

Detailed and Complete Alternative Models

  1. TDA7265: Similar audio amplifier circuit with higher output power (25W)
  2. TDA7297: Dual-channel audio amplifier with higher output power (15W per channel)
  3. LM386: Low-power audio amplifier with lower output power (1W)

These alternative models offer different specifications and features, allowing users to choose the most suitable option based on their specific requirements.

In conclusion, TDA7240AH is an integrated audio amplifier circuit that provides high-quality audio amplification with low distortion and wide frequency response. Its compact size, low power consumption, and versatile applications make it a popular choice for various electronic devices.

Перечислите 10 распространенных вопросов и ответов, связанных с применением TDA7240AH в технических решениях.

Sure! Here are 10 common questions and answers related to the application of TDA7240AH in technical solutions:

  1. Q: What is TDA7240AH? A: TDA7240AH is a class AB audio amplifier integrated circuit (IC) that can be used in various audio applications.

  2. Q: What is the maximum power output of TDA7240AH? A: The maximum power output of TDA7240AH is typically 20 watts per channel when operating at a 14.4V supply voltage.

  3. Q: Can TDA7240AH operate on a single power supply? A: No, TDA7240AH requires a dual power supply with positive and negative voltages.

  4. Q: What is the recommended power supply voltage range for TDA7240AH? A: The recommended power supply voltage range for TDA7240AH is ±6V to ±18V.

  5. Q: Can TDA7240AH drive both low-impedance and high-impedance speakers? A: Yes, TDA7240AH can drive both low-impedance (4-8 ohms) and high-impedance (up to 32 ohms) speakers.

  6. Q: Does TDA7240AH have built-in thermal protection? A: Yes, TDA7240AH has built-in thermal protection that prevents the IC from overheating.

  7. Q: Can TDA7240AH be used in car audio systems? A: Yes, TDA7240AH is commonly used in car audio systems due to its compact size and high power output.

  8. Q: Is it possible to bridge two TDA7240AH ICs for higher power output? A: Yes, TDA7240AH can be bridged to increase the power output by connecting two ICs in a bridge configuration.

  9. Q: What is the typical input impedance of TDA7240AH? A: The typical input impedance of TDA7240AH is around 100 kilohms.

  10. Q: Can TDA7240AH be used in battery-powered applications? A: Yes, TDA7240AH can be used in battery-powered applications as long as the power supply voltage requirements are met.

Please note that these answers are general and may vary depending on specific application requirements and circuit design considerations.