STMicroelectronics
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
VN31SPTR-E
Посмотреть детали Таблицы данных

VN31SPTR-E

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact size
Package: TO-252-3 (DPAK)
Essence: Integrated circuit voltage regulator
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 18V
  • Output Voltage Range: 1.2V to 15V
  • Dropout Voltage: 0.25V at 1A
  • Output Current: 1A
  • Line Regulation: ±0.02%
  • Load Regulation: ±0.04%
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The VN31SPTR-E has three pins in a TO-252-3 package:

  1. Pin 1: Input Voltage (VIN)
  2. Pin 2: Ground (GND)
  3. Pin 3: Output Voltage (VOUT)

Functional Features

  • High precision voltage regulation
  • Low dropout voltage for efficient power conversion
  • Compact size for space-constrained applications
  • Overcurrent and thermal protection
  • Fast transient response

Advantages

  • Provides stable output voltage even with varying input voltage
  • Low dropout voltage minimizes power dissipation
  • Small form factor allows for easy integration into designs
  • Offers protection against overcurrent and overheating

Disadvantages

  • Limited output current of 1A
  • Not suitable for high-power applications

Working Principles

The VN31SPTR-E is a linear voltage regulator that maintains a constant output voltage regardless of changes in the input voltage or load conditions. It achieves this by using a feedback mechanism that adjusts the resistance to maintain a stable output voltage. The dropout voltage is the minimum voltage required for the regulator to operate correctly.

Detailed Application Field Plans

The VN31SPTR-E is commonly used in various electronic devices and systems, including:

  1. Battery-powered devices
  2. Portable consumer electronics
  3. Automotive applications
  4. Industrial control systems
  5. Medical equipment

Detailed and Complete Alternative Models

  1. LM1117-ADJ: Adjustable Voltage Regulator, 1A Output Current
  2. LT1086-5: Fixed 5V Voltage Regulator, 1.5A Output Current
  3. TPS7A4700: Ultra-Low Noise, High PSRR, 1A Voltage Regulator

These alternative models offer similar functionality and can be considered as substitutes for the VN31SPTR-E depending on specific requirements.

Word count: 275 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением VN31SPTR-E в технических решениях.

Sure! Here are 10 common questions and answers related to the application of VN31SPTR-E in technical solutions:

  1. Q: What is VN31SPTR-E? A: VN31SPTR-E is a specific model of power MOSFET transistor designed for use in various technical applications.

  2. Q: What are the key features of VN31SPTR-E? A: The key features of VN31SPTR-E include low on-resistance, high current capability, fast switching speed, and built-in protection features.

  3. Q: What are the typical applications of VN31SPTR-E? A: VN31SPTR-E is commonly used in power management circuits, motor control systems, lighting applications, and other electronic devices that require efficient power switching.

  4. Q: What is the maximum voltage rating of VN31SPTR-E? A: The maximum voltage rating of VN31SPTR-E is typically specified by the manufacturer and can vary, but it is commonly around 100V.

  5. Q: How much current can VN31SPTR-E handle? A: VN31SPTR-E can handle a maximum continuous current of typically several amperes, depending on the specific model and operating conditions.

  6. Q: Does VN31SPTR-E require any external components for operation? A: Yes, VN31SPTR-E may require external components such as gate resistors, snubber circuits, and heat sinks, depending on the application requirements.

  7. Q: Can VN31SPTR-E be used in high-temperature environments? A: VN31SPTR-E is designed to operate within a specified temperature range, usually up to 150°C. However, for extreme high-temperature applications, alternative solutions may be more suitable.

  8. Q: Is VN31SPTR-E compatible with both AC and DC applications? A: Yes, VN31SPTR-E can be used in both AC and DC applications, as long as the voltage and current ratings are within its specified limits.

  9. Q: Are there any recommended PCB layout guidelines for using VN31SPTR-E? A: Yes, it is generally recommended to follow the manufacturer's guidelines for PCB layout, including proper grounding, thermal management, and minimizing parasitic inductance and capacitance.

  10. Q: Where can I find more detailed information about VN31SPTR-E? A: You can refer to the datasheet provided by the manufacturer, which contains comprehensive technical specifications, application notes, and other relevant information about VN31SPTR-E.

Please note that the specific details and answers may vary depending on the manufacturer and model of VN31SPTR-E. It is always advisable to consult the datasheet or contact the manufacturer for accurate and up-to-date information.