STMicroelectronics
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
VNH9013YTR
Посмотреть детали Таблицы данных

VNH9013YTR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Driver
  • Characteristics: High current capability, low voltage drop, thermal shutdown protection
  • Package: PowerSSO-24
  • Essence: A versatile motor driver IC designed for automotive applications
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Operating Voltage Range: 5.5V to 36V
  • Continuous Output Current: 30A
  • Peak Output Current: 60A
  • Standby Current: <10µA
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The VNH9013YTR has a total of 24 pins. The pin configuration is as follows:

  1. OUT1A: Output 1A
  2. OUT1B: Output 1B
  3. GND: Ground
  4. VS: Supply voltage
  5. OUT2A: Output 2A
  6. OUT2B: Output 2B
  7. OUT3A: Output 3A
  8. OUT3B: Output 3B
  9. OUT4A: Output 4A
  10. OUT4B: Output 4B
  11. OUT5A: Output 5A
  12. OUT5B: Output 5B
  13. OUT6A: Output 6A
  14. OUT6B: Output 6B
  15. OUT7A: Output 7A
  16. OUT7B: Output 7B
  17. OUT8A: Output 8A
  18. OUT8B: Output 8B
  19. OUT9A: Output 9A
  20. OUT9B: Output 9B
  21. OUT10A: Output 10A
  22. OUT10B: Output 10B
  23. VCC: Logic supply voltage
  24. EN: Enable pin

Functional Features

  • High current capability allows driving of motors with high power requirements
  • Low voltage drop minimizes power loss and improves efficiency
  • Thermal shutdown protection prevents overheating and damage to the IC

Advantages and Disadvantages

Advantages: - Versatile motor driver suitable for a wide range of automotive applications - High current capability enables driving of powerful motors - Low voltage drop ensures efficient operation

Disadvantages: - Limited to a maximum operating voltage of 36V - Requires careful thermal management to prevent overheating

Working Principles

The VNH9013YTR is based on a robust H-bridge configuration, allowing bidirectional control of DC motors. It utilizes MOSFET technology to achieve high current capability and low voltage drop. The enable pin (EN) can be used to activate or deactivate the motor driver.

Detailed Application Field Plans

The VNH9013YTR is commonly used in various automotive applications, including: - Electric power steering systems - Electric braking systems - HVAC blowers - Window lifters - Seat adjustment mechanisms

Detailed and Complete Alternative Models

  1. VNH2SP30-E: Similar motor driver IC with lower current capability (30A continuous)
  2. VNH5019A-E: Motor driver IC with higher current capability (50A continuous)
  3. DRV8874PWPR: Another motor driver IC with similar characteristics and package

These alternative models provide options with varying specifications to suit different application requirements.

Word count: 346 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением VNH9013YTR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of VNH9013YTR in technical solutions:

  1. Q: What is VNH9013YTR? A: VNH9013YTR is a dual high-current motor driver IC that can be used to control DC motors or other loads in various technical applications.

  2. Q: What is the maximum current rating of VNH9013YTR? A: The maximum current rating of VNH9013YTR is 30A, making it suitable for driving high-power motors or loads.

  3. Q: Can VNH9013YTR handle both forward and reverse motor rotation? A: Yes, VNH9013YTR supports bidirectional control, allowing you to easily control the direction of motor rotation.

  4. Q: How does VNH9013YTR protect against overcurrent conditions? A: VNH9013YTR has built-in overcurrent protection, which automatically shuts off the output when the current exceeds a certain threshold, preventing damage to the IC or the load.

  5. Q: Can VNH9013YTR operate at different voltage levels? A: Yes, VNH9013YTR can operate within a wide voltage range, typically from 5V to 36V, making it compatible with various power supply configurations.

  6. Q: Does VNH9013YTR require external components for operation? A: Yes, VNH9013YTR requires external components such as capacitors and resistors for proper operation. The datasheet provides detailed information on the required components.

  7. Q: Is VNH9013YTR suitable for controlling stepper motors? A: No, VNH9013YTR is specifically designed for controlling DC motors or other loads. For stepper motor control, you would need a different motor driver IC.

  8. Q: Can VNH9013YTR be controlled using microcontrollers or Arduino boards? A: Yes, VNH9013YTR can be easily controlled using microcontrollers or Arduino boards by providing appropriate digital signals to its input pins.

  9. Q: What is the thermal protection feature of VNH9013YTR? A: VNH9013YTR has built-in thermal protection that monitors the temperature of the IC. If the temperature exceeds a certain threshold, it automatically reduces the output current to prevent overheating.

  10. Q: Are there any application examples where VNH9013YTR is commonly used? A: Yes, VNH9013YTR is commonly used in applications such as robotics, electric vehicles, industrial automation, and other projects that require high-current motor control.

Please note that these answers are general and may vary depending on specific use cases and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information and guidelines.