Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
74ALVTH16373VRG4
Посмотреть детали Таблицы данных

74ALVTH16373VRG4

Product Overview

Category

The 74ALVTH16373VRG4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal transmission and reception in digital systems.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • 3-state outputs
  • ESD protection

Package

The 74ALVTH16373VRG4 is available in various package types, including TSSOP and TVSOP.

Essence

This IC serves as a versatile solution for digital signal transmission and reception with its high-speed operation and low power consumption.

Packaging/Quantity

The 74ALVTH16373VRG4 is typically packaged in reels or tubes, with varying quantities based on customer requirements.

Specifications

  • Operating Voltage Range: 1.65V to 3.6V
  • High-Speed Operation: Up to 400MHz
  • Output Drive Capability: ±24mA at 3.0V
  • ESD Protection: HBM JESD22-A114F Class 2

Detailed Pin Configuration

The 74ALVTH16373VRG4 features a 48-pin configuration, with each pin serving specific input, output, and control functions. The detailed pin configuration can be found in the product datasheet.

Functional Features

  • 16-bit transparent D-type latches
  • 3-state outputs for bus-oriented applications
  • Power-off high-impedance inputs and outputs
  • ESD protection for enhanced reliability

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transmission
  • Low power consumption contributes to energy efficiency
  • Wide operating voltage range enhances versatility

Disadvantages

  • Limited output drive capability compared to some alternative models
  • May require additional ESD protection measures in certain applications

Working Principles

The 74ALVTH16373VRG4 operates by latching input data and transmitting it through the 3-state outputs when enabled. The IC's design allows for high-speed operation while maintaining low power consumption.

Detailed Application Field Plans

Data Communication Systems

The IC can be utilized in data communication systems for signal transmission between different components, such as microcontrollers, memory devices, and peripherals.

Industrial Control Systems

In industrial control systems, the 74ALVTH16373VRG4 can facilitate the exchange of digital signals between sensors, actuators, and control units.

Consumer Electronics

For consumer electronics applications, this IC can support signal transmission within devices like smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

  • SN74LVC16373A
  • MC74LVX373

These alternative models offer similar functionality and are compatible replacements for the 74ALVTH16373VRG4 in various applications.

In conclusion, the 74ALVTH16373VRG4 is a versatile integrated circuit with high-speed operation, low power consumption, and wide application potential across various digital systems.

Word Count: 489

Перечислите 10 распространенных вопросов и ответов, связанных с применением 74ALVTH16373VRG4 в технических решениях.

  1. What is the 74ALVTH16373VRG4 used for?

    • The 74ALVTH16373VRG4 is a 16-bit transparent D-type latch with 3-state outputs, designed for use in high-performance applications.

  2. What are the key features of the 74ALVTH16373VRG4?

    • Some key features include low voltage operation, high-speed performance, 3-state outputs, and compatibility with various logic levels.

  3. What are the typical applications of the 74ALVTH16373VRG4?

    • Typical applications include data storage, signal buffering, address driving, and bus interfacing in various technical solutions.

  4. What is the operating voltage range of the 74ALVTH16373VRG4?

    • The 74ALVTH16373VRG4 operates within a voltage range of 1.65V to 3.6V, making it suitable for low-power and portable devices.

  5. How does the 3-state output feature benefit technical solutions?

    • The 3-state output allows the device to be effectively disconnected from the bus, reducing power consumption and enabling multiple devices to share the same bus.

  6. Can the 74ALVTH16373VRG4 handle high-speed data transfer?

    • Yes, the 74ALVTH16373VRG4 is capable of high-speed data transfer, making it suitable for applications requiring rapid signal processing.

  7. Is the 74ALVTH16373VRG4 compatible with other logic families?

    • Yes, the 74ALVTH16373VRG4 is compatible with various logic families, enhancing its versatility in different technical solutions.

  8. What precautions should be taken when using the 74ALVTH16373VRG4 in mixed-voltage systems?

    • Care should be taken to ensure proper level shifting and isolation to prevent damage to the device when interfacing with different voltage domains.

  9. Are there any specific layout considerations for optimal performance?

    • Proper decoupling, signal integrity, and thermal management should be considered in the layout to ensure reliable and stable operation.

  10. Where can I find detailed technical specifications and application notes for the 74ALVTH16373VRG4?

    • Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or on their official website.