Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
AM26C32IPWG4
Посмотреть детали Таблицы данных

AM26C32IPWG4

Product Overview

Category

The AM26C32IPWG4 belongs to the category of integrated circuits (ICs) and specifically falls under the family of RS-422/RS-485 interface ICs.

Use

This product is commonly used for differential line driver and receiver applications in serial communication systems.

Characteristics

  • High-speed operation
  • Wide operating voltage range
  • ESD protection
  • Low power consumption

Package

The AM26C32IPWG4 is available in a 16-pin TSSOP package, making it suitable for surface mount applications.

Essence

The essence of this product lies in its ability to provide reliable and high-speed differential signaling for data transmission over long distances.

Packaging/Quantity

The AM26C32IPWG4 is typically supplied in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Operating Voltage Range: 4.75V to 5.25V
  • Data Rate: Up to 20 Mbps
  • Operating Temperature Range: -40°C to 85°C
  • Input Hysteresis: 50mV
  • Common-Mode Range: ±7V

Detailed Pin Configuration

The detailed pin configuration of the AM26C32IPWG4 is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage | | 2 | A | Non-inverting data input | | 3 | B | Inverting data input | | 4 | /RE | Receiver enable (active low) | | 5 | GND | Ground | | 6 | Y | Non-inverting data output | | 7 | Z | Inverting data output | | 8 | /DE | Driver enable (active low) | | 9-16 | NC | No connection |

Functional Features

  • Differential Line Driver and Receiver
  • ESD Protection
  • High-Speed Operation
  • Low Power Consumption
  • Wide Operating Voltage Range

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transmission
  • Wide operating voltage range allows for versatile use in different systems
  • ESD protection enhances reliability in harsh environments

Disadvantages

  • Limited common-mode range may restrict certain applications
  • Requires careful consideration of termination and biasing for optimal performance

Working Principles

The AM26C32IPWG4 operates by receiving differential input signals and providing differential output signals, making it suitable for long-distance data transmission. The driver and receiver enable pins (/DE and /RE) control the direction of data flow, while the integrated ESD protection safeguards against electrostatic discharge events.

Detailed Application Field Plans

The AM26C32IPWG4 finds extensive application in various industries, including: - Industrial automation - Telecommunications - Automotive electronics - Networking equipment

Detailed and Complete Alternative Models

Some alternative models to the AM26C32IPWG4 include: - MAX481 - SN75176 - LTC490

In conclusion, the AM26C32IPWG4 offers high-speed, reliable differential signaling for a wide range of applications, making it a versatile choice for designers seeking robust communication solutions.

[Word Count: 498]

Перечислите 10 распространенных вопросов и ответов, связанных с применением AM26C32IPWG4 в технических решениях.

  1. What is the AM26C32IPWG4?

    • The AM26C32IPWG4 is a quad differential line receiver designed for digital data transmission over balanced lines.

  2. What is the operating voltage range of the AM26C32IPWG4?

    • The operating voltage range of the AM26C32IPWG4 is from 4.5V to 5.5V.

  3. What is the typical input threshold voltage of the AM26C32IPWG4?

    • The typical input threshold voltage of the AM26C32IPWG4 is 200mV.

  4. What is the maximum data rate supported by the AM26C32IPWG4?

    • The maximum data rate supported by the AM26C32IPWG4 is 20Mbps.

  5. What are the typical applications of the AM26C32IPWG4?

    • The typical applications of the AM26C32IPWG4 include RS-422 and RS-485 communication systems, industrial control systems, and point-to-point data transmission.

  6. What is the pin configuration of the AM26C32IPWG4?

    • The AM26C32IPWG4 has a 16-pin TSSOP package with specific pin assignments for differential inputs and outputs.

  7. What is the common-mode voltage range of the AM26C32IPWG4?

    • The common-mode voltage range of the AM26C32IPWG4 is from -7V to 12V.

  8. Does the AM26C32IPWG4 have built-in ESD protection?

    • Yes, the AM26C32IPWG4 features built-in ESD protection, making it suitable for robust industrial applications.

  9. Can the AM26C32IPWG4 be used in half-duplex communication systems?

    • Yes, the AM26C32IPWG4 can be used in half-duplex communication systems due to its differential line receiver design.

  10. Is the AM26C32IPWG4 compatible with standard TTL or CMOS logic levels?

    • Yes, the AM26C32IPWG4 is compatible with standard TTL or CMOS logic levels, providing versatility in system integration.