Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
BQ34Z100PWR
Посмотреть детали Таблицы данных

BQ34Z100PWR

Product Overview

Category

BQ34Z100PWR belongs to the category of integrated circuits (ICs) specifically designed for battery management systems.

Use

This product is primarily used for monitoring and controlling the performance of rechargeable batteries in various applications, such as portable electronic devices, electric vehicles, and renewable energy systems.

Characteristics

  • Integrated circuit for battery management
  • Accurate voltage and current measurement capabilities
  • Temperature sensing and compensation
  • Advanced algorithms for state-of-charge estimation
  • Communication interface for data exchange with external systems

Package

BQ34Z100PWR is available in a small form factor package, typically a 20-pin TSSOP (Thin Shrink Small Outline Package). This package offers good thermal dissipation and ease of integration into different electronic systems.

Essence

The essence of BQ34Z100PWR lies in its ability to accurately monitor and manage the performance of rechargeable batteries, ensuring optimal utilization and extending their lifespan.

Packaging/Quantity

This product is commonly supplied in tape and reel packaging, with a quantity of 2500 units per reel. Other packaging options may be available depending on the supplier.

Specifications

  • Operating Voltage: 2.7V to 4.8V
  • Temperature Range: -40°C to +85°C
  • Communication Interface: I2C or SMBus
  • Battery Capacity Measurement Range: 0mAh to 65,535mAh
  • Accuracy: ±10mAh or ±1% (whichever is greater)
  • Cell Balancing Support: Yes
  • Overvoltage/Undervoltage Protection: Yes
  • Overcurrent Protection: Yes

Detailed Pin Configuration

  1. VDD: Power supply voltage input
  2. GND: Ground reference
  3. SDA: Serial data line for I2C/SMBus communication
  4. SCL: Serial clock line for I2C/SMBus communication
  5. ALERT: Interrupt output for battery status changes
  6. BAT: Battery voltage sense input
  7. TS: Temperature sense input
  8. VSS: Negative terminal of the sense resistor
  9. VDD: Positive terminal of the sense resistor
  10. CBAT: Capacitor connection for battery voltage filtering
  11. VSS: Negative terminal of the current sense resistor
  12. VDD: Positive terminal of the current sense resistor
  13. CC: Current sense input
  14. VSS: Negative terminal of the external thermistor
  15. VDD: Positive terminal of the external thermistor
  16. THERM: External thermistor sense input
  17. VSS: Negative terminal of the cell balancing resistor
  18. VDD: Positive terminal of the cell balancing resistor
  19. CBAL: Cell balancing control output
  20. VDD: Power supply voltage input

Functional Features

  • Accurate measurement of battery voltage, current, and temperature
  • State-of-charge estimation using advanced algorithms
  • Overvoltage and undervoltage protection
  • Overcurrent protection
  • Cell balancing capability for multi-cell battery packs
  • Low-power consumption in standby mode
  • Configurable alert system for battery status monitoring
  • Data logging and event recording capabilities

Advantages and Disadvantages

Advantages

  • High accuracy in battery parameter measurements
  • Advanced algorithms for precise state-of-charge estimation
  • Integrated cell balancing functionality reduces the need for external components
  • Wide operating voltage range allows compatibility with various battery types
  • Robust overvoltage, undervoltage, and overcurrent protection mechanisms

Disadvantages

  • Relatively higher cost compared to basic battery management solutions
  • Requires knowledge of I2C or SMBus communication protocols for integration
  • Limited availability of alternative models from different manufacturers

Working Principles

BQ34Z100PWR operates by continuously monitoring the battery voltage, current, and temperature. It utilizes sophisticated algorithms to estimate the state-of-charge accurately. The integrated cell balancing feature ensures that each cell in a multi-cell battery pack is charged and discharged evenly, maximizing overall battery performance and lifespan.

Detailed Application Field Plans

BQ34Z100PWR finds applications in various fields, including: 1. Portable electronic devices: Smartphones, tablets, laptops, and wearable devices. 2. Electric vehicles: Battery management systems for electric cars, bikes, and scooters. 3. Renewable energy systems: Solar power storage, wind energy storage, and off-grid applications. 4. Industrial equipment: Forklifts, robotics, and backup power systems.

Detailed and Complete Alternative Models

While BQ34Z100PWR is a widely used battery management IC, there are several alternative models available in the market. Some notable alternatives include:

  1. MAX17043G+T: Integrated fuel gauge IC with high accuracy and low power consumption.
  2. LTC680

Перечислите 10 распространенных вопросов и ответов, связанных с применением BQ34Z100PWR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of BQ34Z100PWR in technical solutions:

  1. Q: What is the BQ34Z100PWR? A: The BQ34Z100PWR is a fuel gauge and battery management IC (Integrated Circuit) designed for use in various applications, including portable devices and electric vehicles.

  2. Q: What are the key features of the BQ34Z100PWR? A: Some key features of the BQ34Z100PWR include accurate battery capacity estimation, voltage and current monitoring, temperature sensing, and support for various battery chemistries.

  3. Q: How does the BQ34Z100PWR estimate battery capacity? A: The BQ34Z100PWR uses an advanced algorithm that takes into account factors like voltage, current, temperature, and battery aging to provide accurate estimates of remaining battery capacity.

  4. Q: Can the BQ34Z100PWR be used with different types of batteries? A: Yes, the BQ34Z100PWR supports various battery chemistries, including lithium-ion, lithium-polymer, and lead-acid batteries.

  5. Q: Does the BQ34Z100PWR require calibration? A: Yes, the BQ34Z100PWR requires initial calibration to accurately estimate battery capacity. It also supports periodic recalibration to maintain accuracy over time.

  6. Q: Can the BQ34Z100PWR monitor battery voltage and current? A: Yes, the BQ34Z100PWR can measure battery voltage and current, allowing for real-time monitoring of power consumption and charging/discharging status.

  7. Q: Is the BQ34Z100PWR suitable for electric vehicle applications? A: Yes, the BQ34Z100PWR is commonly used in electric vehicle applications due to its accurate battery capacity estimation and support for high-current charging/discharging.

  8. Q: Does the BQ34Z100PWR have built-in temperature sensing? A: Yes, the BQ34Z100PWR has an integrated temperature sensor that helps in accurately estimating battery capacity and monitoring temperature-related safety parameters.

  9. Q: Can the BQ34Z100PWR communicate with a microcontroller or host system? A: Yes, the BQ34Z100PWR supports communication protocols like I2C and SMBus, allowing it to interface with microcontrollers or host systems for data exchange and control.

  10. Q: Are there any evaluation boards or development kits available for the BQ34Z100PWR? A: Yes, Texas Instruments offers evaluation modules and development kits for the BQ34Z100PWR, which provide a convenient platform for testing and prototyping battery management solutions.

Please note that these answers are general and may vary depending on specific implementation requirements and datasheet specifications.