Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
CD74AC257MG4
Посмотреть детали Таблицы данных

CD74AC257MG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Data Selector/Multiplexer
  • Characteristics: High-speed, low-power, 4-bit multiplexer
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: CD74AC257MG4 is a versatile IC that allows the selection of one out of four data inputs and routes it to a single output.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: 2V - 6V
  • Operating Temperature: -40°C to +85°C
  • Propagation Delay: 5ns (typical)
  • Input Capacitance: 3pF (typical)
  • Output Current: ±24mA
  • Logic Family: AC

Detailed Pin Configuration

The CD74AC257MG4 has a total of 16 pins. The pin configuration is as follows:

  1. A0: Data Input 0
  2. A1: Data Input 1
  3. A2: Data Input 2
  4. A3: Data Input 3
  5. GND: Ground
  6. Y: Output
  7. E: Enable Input
  8. B: Select Input
  9. C: Select Input
  10. D: Select Input
  11. VCC: Supply Voltage 12-16: NC (No Connection)

Functional Features

  • 4-to-1 data selector/multiplexer
  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Schmitt-trigger input for noise immunity
  • Output current capability for driving various loads

Advantages and Disadvantages

Advantages

  • Versatile multiplexing functionality
  • Low power consumption
  • Fast operation
  • Wide operating voltage range allows compatibility with various systems
  • Noise immunity due to Schmitt-trigger input

Disadvantages

  • Limited to 4-bit data selection
  • Output current capability may not be sufficient for certain high-power applications

Working Principles

The CD74AC257MG4 operates based on the principle of digital multiplexing. It selects one out of four data inputs based on the select inputs (B, C, and D) and routes it to the output pin (Y). The enable input (E) controls the operation of the IC. When E is low, the IC is disabled, and the output remains in a high-impedance state.

Detailed Application Field Plans

The CD74AC257MG4 finds applications in various fields, including:

  1. Data communication systems
  2. Digital signal processing
  3. Multiplexing in microcontrollers
  4. Industrial automation
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. SN74AC257: Similar functionality from Texas Instruments
  2. MC74AC257: Alternative option from ON Semiconductor
  3. 74HC257: High-speed CMOS alternative from NXP Semiconductors
  4. CD4051: 8-channel analog multiplexer/demultiplexer from Texas Instruments

These alternative models provide similar or enhanced functionality compared to the CD74AC257MG4 and can be considered based on specific requirements.

Word count: 342 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением CD74AC257MG4 в технических решениях.

Sure! Here are 10 common questions and answers related to the application of CD74AC257MG4 in technical solutions:

  1. Q: What is CD74AC257MG4? A: CD74AC257MG4 is a quad 2-input multiplexer with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the operating voltage range for CD74AC257MG4? A: The operating voltage range for CD74AC257MG4 is typically between 2V and 6V.

  3. Q: How many inputs does CD74AC257MG4 have? A: CD74AC257MG4 has four inputs, labeled A, B, C, and D.

  4. Q: What are the output states of CD74AC257MG4? A: CD74AC257MG4 has 3-state outputs, which means they can be in high (logic 1), low (logic 0), or high-impedance state.

  5. Q: Can CD74AC257MG4 be used as a demultiplexer? A: No, CD74AC257MG4 is specifically designed as a multiplexer and cannot be used as a demultiplexer.

  6. Q: What is the maximum frequency at which CD74AC257MG4 can operate? A: CD74AC257MG4 can typically operate at frequencies up to 100 MHz.

  7. Q: How can CD74AC257MG4 be controlled? A: CD74AC257MG4 can be controlled using the select inputs (S0 and S1) to choose one of the four inputs to be routed to the output.

  8. Q: What is the typical propagation delay of CD74AC257MG4? A: The typical propagation delay of CD74AC257MG4 is around 5 ns.

  9. Q: Can CD74AC257MG4 drive high capacitive loads? A: Yes, CD74AC257MG4 has a high output drive capability and can drive relatively high capacitive loads.

  10. Q: What are some common applications of CD74AC257MG4? A: CD74AC257MG4 is commonly used in data multiplexing, signal routing, address decoding, and bus switching applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.