Подробную информацию о продукте см. в характеристиках.
INA197AIDBVRG4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Instrumentation Amplifier
- Characteristics: High precision, low noise, small package size
- Package: SOT-23-6
- Essence: Precision signal amplification
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Supply Voltage: 2.7V to 5.5V
- Input Offset Voltage: ±150µV
- Gain Bandwidth Product: 1.3MHz
- Input Bias Current: ±250nA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The INA197AIDBVRG4 has a total of 6 pins: 1. OUT: Output 2. V+: Positive Supply Voltage 3. REF: Reference Voltage 4. V-: Negative Supply Voltage 5. IN-: Inverting Input 6. IN+: Non-Inverting Input
Functional Features
- High precision amplification of differential input signals
- Low noise and low distortion
- Wide supply voltage range for versatile applications
- Small package size for space-constrained designs
Advantages and Disadvantages
Advantages
- High precision amplification
- Low noise and distortion
- Wide supply voltage range
- Small package size
Disadvantages
- Limited maximum gain compared to some alternative models
- Higher cost compared to basic operational amplifiers
Working Principles
The INA197AIDBVRG4 is designed to accurately amplify small differential input signals while rejecting common-mode noise. It achieves this through a combination of precision internal circuitry and high-quality components.
Detailed Application Field Plans
The INA197AIDBVRG4 is well-suited for applications requiring precise amplification of small differential signals, such as: - Sensor signal conditioning - Bridge amplification - Medical instrumentation - Industrial process control
Detailed and Complete Alternative Models
Some alternative models to the INA197AIDBVRG4 include: - AD623: Low-cost instrumentation amplifier with similar performance - INA333: Precision instrumentation amplifier with higher gain options - AD8421: Ultra-low noise instrumentation amplifier for sensitive measurements
This concludes the detailed entry for the INA197AIDBVRG4, covering its product overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Word count: 346
Перечислите 10 распространенных вопросов и ответов, связанных с применением INA197AIDBVRG4 в технических решениях.
What is the INA197AIDBVRG4 used for?
- The INA197AIDBVRG4 is a precision current shunt monitor that can be used to measure small differential voltages across a high-side shunt resistor.
What is the input voltage range of the INA197AIDBVRG4?
- The input voltage range of the INA197AIDBVRG4 is from 2.7V to 26V.
What is the typical gain of the INA197AIDBVRG4?
- The typical gain of the INA197AIDBVRG4 is 50V/V.
How accurate is the output of the INA197AIDBVRG4?
- The output accuracy of the INA197AIDBVRG4 is typically within 0.5%.
What are the common applications of the INA197AIDBVRG4?
- Common applications include motor control, power management, and battery management systems.
What is the operating temperature range of the INA197AIDBVRG4?
- The operating temperature range of the INA197AIDBVRG4 is from -40°C to 125°C.
Does the INA197AIDBVRG4 require an external reference voltage?
- Yes, the INA197AIDBVRG4 requires an external reference voltage.
Can the INA197AIDBVRG4 be used in automotive applications?
- Yes, the INA197AIDBVRG4 is suitable for automotive applications.
What is the supply voltage range of the INA197AIDBVRG4?
- The supply voltage range of the INA197AIDBVRG4 is from 2.7V to 5.5V.
Is the INA197AIDBVRG4 available in a small package for space-constrained designs?
- Yes, the INA197AIDBVRG4 is available in a small SOT-23 package for space-constrained designs.