Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SN74ACT564DBRG4

SN74ACT564DBRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Logic
  • Characteristics: Octal D-Type Flip-Flop with 3-State Outputs
  • Package: 20-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: High-speed, low-power consumption flip-flop IC
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2V to 6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 5.5ns (typical)
  • Output Drive Capability: ±24mA
  • Power Dissipation: 500mW (max)

Detailed Pin Configuration

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. CP (Clock Pulse Input)
  11. OE (Output Enable Input)
  12. Q0 (Flip-Flop Output 0)
  13. Q1 (Flip-Flop Output 1)
  14. Q2 (Flip-Flop Output 2)
  15. Q3 (Flip-Flop Output 3)
  16. Q4 (Flip-Flop Output 4)
  17. Q5 (Flip-Flop Output 5)
  18. Q6 (Flip-Flop Output 6)
  19. Q7 (Flip-Flop Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • Octal D-Type Flip-Flop with 3-State Outputs
  • High-speed operation with low propagation delay
  • 3-state outputs allow multiple devices to share a common bus
  • Edge-triggered clock input for synchronized data transfer
  • Output enable input for controlling the output state

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data processing - Low power consumption for energy-efficient applications - 3-state outputs facilitate bus sharing in complex systems

Disadvantages: - Limited voltage range of 2V to 6V may restrict certain applications - Maximum power dissipation of 500mW may require additional cooling measures in high-power setups

Working Principles

The SN74ACT564DBRG4 is an octal D-type flip-flop IC that stores and transfers digital data. It operates on the rising edge of the clock pulse input (CP), capturing the data inputs (D0-D7) and storing them in the flip-flops. The stored data can then be accessed through the corresponding flip-flop outputs (Q0-Q7).

The output enable input (OE) controls the state of the flip-flop outputs. When OE is low, the outputs are enabled and reflect the stored data. Conversely, when OE is high, the outputs are disabled and enter a high-impedance state, allowing other devices to drive the shared bus.

Detailed Application Field Plans

The SN74ACT564DBRG4 is commonly used in various digital logic applications, including:

  1. Microprocessors and microcontrollers
  2. Data storage systems
  3. Communication equipment
  4. Industrial automation
  5. Automotive electronics
  6. Consumer electronics

Its high-speed operation and 3-state outputs make it suitable for applications requiring efficient data transfer and bus sharing.

Detailed and Complete Alternative Models

  1. SN74ACT574DBRG4: Octal D-Type Flip-Flop with 3-State Outputs, similar to SN74ACT564DBRG4 but in a different package (SSOP).
  2. SN74ACT563DBRG4: Octal Transparent D-Type Latches with 3-State Outputs, alternative for latch-based applications.
  3. SN74ACT3651-30PCB: Octal D-Type Flip-Flop with Differential Clock and 3-State Outputs, suitable for differential signaling applications.

These alternative models offer similar functionality with slight variations in features or package options.

Word count: 443 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением SN74ACT564DBRG4 в технических решениях.

Sure! Here are 10 common questions and answers related to the application of SN74ACT564DBRG4 in technical solutions:

  1. Q: What is SN74ACT564DBRG4? A: SN74ACT564DBRG4 is a octal D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the operating voltage range for SN74ACT564DBRG4? A: The operating voltage range for SN74ACT564DBRG4 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum clock frequency supported by SN74ACT564DBRG4? A: SN74ACT564DBRG4 can support clock frequencies up to 125 MHz.

  4. Q: How many flip-flops are there in SN74ACT564DBRG4? A: SN74ACT564DBRG4 consists of 8 individual D-type flip-flops.

  5. Q: What is the output drive capability of SN74ACT564DBRG4? A: SN74ACT564DBRG4 has a typical output drive capability of ±24 mA.

  6. Q: Can SN74ACT564DBRG4 be used in both parallel and serial data transfer applications? A: Yes, SN74ACT564DBRG4 can be used in both parallel and serial data transfer applications.

  7. Q: Does SN74ACT564DBRG4 have any built-in protection features? A: Yes, SN74ACT564DBRG4 has built-in diode clamps to minimize the effects of electrostatic discharge (ESD).

  8. Q: What is the typical propagation delay of SN74ACT564DBRG4? A: The typical propagation delay of SN74ACT564DBRG4 is around 6 ns.

  9. Q: Can SN74ACT564DBRG4 be used in high-speed applications? A: Yes, SN74ACT564DBRG4 is designed for high-speed operation and can be used in such applications.

  10. Q: What is the package type of SN74ACT564DBRG4? A: SN74ACT564DBRG4 is available in a 20-pin TSSOP (Thin Shrink Small Outline Package) package.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.