Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SN74AUCH16374ZQLR
Посмотреть детали Таблицы данных

SN74AUCH16374ZQLR

Product Overview

Category

The SN74AUCH16374ZQLR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital systems for data storage and transfer applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Robust design for reliable performance

Package

The SN74AUCH16374ZQLR is available in a small-outline integrated circuit (SOIC) package.

Essence

This IC is essential for facilitating the seamless transfer and storage of digital data within electronic devices.

Packaging/Quantity

The SN74AUCH16374ZQLR is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Number of Flip-Flops: 16
  • Logic Family: AUCH
  • Supply Voltage Range: 1.65V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: CMOS/TTL

Detailed Pin Configuration

The SN74AUCH16374ZQLR has a total of 48 pins, which are arranged as follows:

  1. Pin 1: Output Q0
  2. Pin 2: Output Q1
  3. Pin 3: Output Q2
  4. Pin 4: Output Q3
  5. Pin 5: Output Q4
  6. Pin 6: Output Q5
  7. Pin 7: Output Q6
  8. Pin 8: Output Q7
  9. Pin 9: Output Q8
  10. Pin 10: Output Q9
  11. Pin 11: Output Q10
  12. Pin 12: Output Q11
  13. Pin 13: Output Q12
  14. Pin 14: Output Q13
  15. Pin 15: Output Q14
  16. Pin 16: Output Q15
  17. Pin 17: GND (Ground)
  18. Pin 18: Input D0
  19. Pin 19: Input D1
  20. Pin 20: Input D2
  21. Pin 21: Input D3
  22. Pin 22: Input D4
  23. Pin 23: Input D5
  24. Pin 24: Input D6
  25. Pin 25: Input D7
  26. Pin 26: Input D8
  27. Pin 27: Input D9
  28. Pin 28: Input D10
  29. Pin 29: Input D11
  30. Pin 30: Input D12
  31. Pin 31: Input D13
  32. Pin 32: Input D14
  33. Pin 33: Input D15
  34. Pin 34: Clock Input (CLK)
  35. Pin 35: Output Enable (OE)
  36. Pin 36: Master Reset (MR)
  37. Pin 37: Power Supply Voltage (VCC)
  38. Pin 38: Power Supply Voltage (VCC)
  39. Pin 39: Power Supply Voltage (VCC)
  40. Pin 40: Power Supply Voltage (VCC)
  41. Pin 41: Power Supply Voltage (VCC)
  42. Pin 42: Power Supply Voltage (VCC)
  43. Pin 43: Power Supply Voltage (VCC)
  44. Pin 44: Power Supply Voltage (VCC)
  45. Pin 45: Power Supply Voltage (VCC)
  46. Pin 46: Power Supply Voltage (VCC)
  47. Pin 47: Power Supply Voltage (VCC)
  48. Pin 48: Power Supply Voltage (VCC)

Functional Features

  • High-speed data transfer and storage
  • Non-volatile memory elements
  • Output enable control for easy integration into larger systems
  • Master reset functionality for initialization purposes

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data processing
  • Low power consumption contributes to energy efficiency
  • Wide operating voltage range ensures compatibility with various systems
  • Robust design enhances reliability and durability

Disadvantages

  • Limited number of flip-flops may restrict the complexity of applications
  • Requires careful handling due to its small size and delicate pins

Working Principles

The SN74AUCH16374ZQLR operates based on the principles of digital logic circuits. It utilizes flip-flops to store and transfer binary data. The clock input controls the timing of data transfer, while the output enable and master reset signals provide additional control over the IC's functionality.

Detailed Application Field Plans

The SN74AUCH16374ZQLR finds extensive use in various digital systems, including but not limited to:

Перечислите 10 распространенных вопросов и ответов, связанных с применением SN74AUCH16374ZQLR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of SN74AUCH16374ZQLR in technical solutions:

  1. Q: What is SN74AUCH16374ZQLR? A: SN74AUCH16374ZQLR is a 16-bit D-type flip-flop with 3-state outputs, designed for low-voltage digital systems.

  2. Q: What is the operating voltage range of SN74AUCH16374ZQLR? A: SN74AUCH16374ZQLR operates within a voltage range of 0.8V to 3.6V.

  3. Q: What is the maximum data transfer rate supported by SN74AUCH16374ZQLR? A: SN74AUCH16374ZQLR supports a maximum data transfer rate of 400 Mbps.

  4. Q: Can SN74AUCH16374ZQLR be used in both input and output applications? A: Yes, SN74AUCH16374ZQLR can be used as both an input and output device.

  5. Q: What is the purpose of the 3-state outputs in SN74AUCH16374ZQLR? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.

  6. Q: Does SN74AUCH16374ZQLR have any built-in protection features? A: Yes, SN74AUCH16374ZQLR has built-in ESD (electrostatic discharge) protection to prevent damage from static electricity.

  7. Q: Can SN74AUCH16374ZQLR be cascaded to increase the number of flip-flops? A: Yes, SN74AUCH16374ZQLR can be cascaded to create larger registers or shift registers.

  8. Q: What is the power supply current required by SN74AUCH16374ZQLR? A: The power supply current for SN74AUCH16374ZQLR depends on the operating conditions and can be found in the datasheet.

  9. Q: Can SN74AUCH16374ZQLR tolerate overvoltage conditions? A: No, SN74AUCH16374ZQLR is not designed to tolerate overvoltage conditions and may get damaged if exposed to excessive voltage.

  10. Q: Are there any specific layout considerations for using SN74AUCH16374ZQLR? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper performance and minimize noise.

Please note that these answers are general and it's always important to refer to the specific datasheet and documentation for accurate information about the device.