Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SN74AUP2G79DCUR

SN74AUP2G79DCUR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate
  • Characteristics: Dual Positive-Edge-Triggered D-Type Flip-Flop
  • Package: 6-Bump micro SMD package
  • Essence: High-speed, low-power consumption flip-flop
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 0.8V to 3.6V
  • High-Speed Operation: 4.5 ns maximum propagation delay
  • Low Power Consumption: 1 µA maximum ICC
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: CMOS level

Detailed Pin Configuration

The SN74AUP2G79DCUR has a total of six pins:

  1. Pin 1: Data Input (D1)
  2. Pin 2: Clock Input (CLK1)
  3. Pin 3: Set Input (SET1)
  4. Pin 4: Data Output (Q1)
  5. Pin 5: Clock Enable Input (CLKEN)
  6. Pin 6: Ground (GND)

Functional Features

  • Dual positive-edge-triggered D-type flip-flop with set input
  • Allows data transfer on the positive edge of the clock signal
  • Supports asynchronous set input for immediate output change
  • Provides clock enable input for controlling clock operation

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data processing - Low power consumption reduces energy usage - Wide supply voltage range allows compatibility with various systems - Small package size saves board space

Disadvantages: - Limited number of flip-flops in a single package - Not suitable for applications requiring a large number of flip-flops

Working Principles

The SN74AUP2G79DCUR is a dual positive-edge-triggered D-type flip-flop. It operates by transferring data from the input (D1) to the output (Q1) on the positive edge of the clock signal (CLK1). The set input (SET1) allows for immediate output change regardless of the clock signal. The clock enable input (CLKEN) controls the clock operation, enabling or disabling the transfer of data.

Detailed Application Field Plans

The SN74AUP2G79DCUR is commonly used in various digital systems and applications, including but not limited to: - Microcontrollers - Data storage devices - Communication systems - Signal processing circuits - Consumer electronics

Detailed and Complete Alternative Models

  1. SN74AUP2G79DCTR: Similar specifications and features, different package type (8-pin VSSOP)
  2. SN74AUP2G79RSER: Similar functionality with additional reset input, different package type (10-pin WSON)
  3. SN74AUP2G79YZPR: Similar characteristics with extended temperature range, different package type (4-pin X2SON)

These alternative models provide similar functionality and can be considered as replacements based on specific requirements.

Word count: 310 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением SN74AUP2G79DCUR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of SN74AUP2G79DCUR in technical solutions:

  1. Q: What is the SN74AUP2G79DCUR? A: The SN74AUP2G79DCUR is a dual positive-edge-triggered D-type flip-flop with clear, designed for 1.8-V to 3.6-V VCC operation.

  2. Q: What are the key features of SN74AUP2G79DCUR? A: Some key features include low power consumption, wide operating voltage range, high-speed operation, and small package size.

  3. Q: What is the maximum operating voltage for SN74AUP2G79DCUR? A: The SN74AUP2G79DCUR can operate within a voltage range of 1.8V to 3.6V.

  4. Q: How many flip-flops are there in SN74AUP2G79DCUR? A: SN74AUP2G79DCUR consists of two flip-flops.

  5. Q: What is the purpose of the clear input in SN74AUP2G79DCUR? A: The clear input allows you to reset the flip-flop to its initial state.

  6. Q: What is the propagation delay of SN74AUP2G79DCUR? A: The propagation delay of SN74AUP2G79DCUR is typically around 2.9 ns.

  7. Q: Can SN74AUP2G79DCUR be used in battery-powered applications? A: Yes, SN74AUP2G79DCUR is suitable for battery-powered applications due to its low power consumption.

  8. Q: What is the package type of SN74AUP2G79DCUR? A: SN74AUP2G79DCUR comes in a small SOT-23 package.

  9. Q: What are some typical applications of SN74AUP2G79DCUR? A: SN74AUP2G79DCUR can be used in various applications such as data storage, synchronization, and control circuits.

  10. Q: Is SN74AUP2G79DCUR RoHS compliant? A: Yes, SN74AUP2G79DCUR is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental standards.

Please note that these answers are general and may vary depending on the specific requirements and use cases.