Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
SN74LS161ADR
Посмотреть детали Таблицы данных

SN74LS161ADR

Product Overview

Category

SN74LS161ADR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronics for various applications such as counters, registers, and other sequential logic circuits.

Characteristics

  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Compatibility with TTL logic levels

Package

SN74LS161ADR is available in a 16-pin plastic dual in-line package (PDIP).

Essence

The essence of SN74LS161ADR lies in its ability to perform binary counting and parallel loading operations efficiently.

Packaging/Quantity

SN74LS161ADR is typically packaged in reels or tubes, with each reel containing 2,000 units.

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 30 MHz
  • Number of Counting Bits: 4
  • Output Current: ±8 mA

Detailed Pin Configuration

  1. Clock Enable (CE)
  2. Parallel Load (PL)
  3. Clock (CLK)
  4. Master Reset (MR)
  5. Data Inputs (D0-D3)
  6. Carry Out (CO)
  7. Count Enable (CTEN)
  8. Data Outputs (Q0-Q3)
  9. GND (Ground)
  10. Ripple Carry (RCO)
  11. Terminal Count (TC)
  12. Borrow (B)
  13. Carry In (CI)
  14. Preset Enable (PE)
  15. Up/Down (U/D)
  16. VCC (Supply Voltage)

Functional Features

  • Binary counting
  • Parallel loading
  • Synchronous operation
  • Asynchronous master reset
  • Carry propagation

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered devices.
  • High-speed operation enables efficient data processing.
  • Wide operating voltage range allows compatibility with various systems.
  • TTL logic level compatibility simplifies interfacing with other components.

Disadvantages

  • Limited number of counting bits restricts the range of applications.
  • Lack of built-in error detection and correction mechanisms may require additional circuitry.

Working Principles

SN74LS161ADR operates based on synchronous binary counting principles. The clock signal triggers the counting process, while the parallel load input allows loading of initial values. The carry input and output facilitate cascading multiple counters. The master reset input resets the counter to its initial state. The up/down input determines the direction of counting.

Detailed Application Field Plans

SN74LS161ADR finds applications in various fields, including: 1. Digital frequency dividers 2. Event counters 3. Industrial automation 4. Traffic light control systems 5. Data communication equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74LS161ADR include: 1. CD40161BE 2. 74HC161D 3. MC74HC161AN 4. CD74HC161E 5. SN54LS161AJ

These alternatives can be considered based on specific requirements and availability.

Word count: 408 words

Перечислите 10 распространенных вопросов и ответов, связанных с применением SN74LS161ADR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of SN74LS161ADR:

  1. Q: What is SN74LS161ADR? A: SN74LS161ADR is a synchronous 4-bit binary counter IC (integrated circuit) that can be used in various technical solutions.

  2. Q: What is the maximum clock frequency supported by SN74LS161ADR? A: SN74LS161ADR supports a maximum clock frequency of 25 MHz.

  3. Q: How many outputs does SN74LS161ADR have? A: SN74LS161ADR has four outputs, representing the four bits of the binary count.

  4. Q: Can SN74LS161ADR be cascaded to create larger counters? A: Yes, multiple SN74LS161ADR ICs can be cascaded together to create larger counters with more bits.

  5. Q: What is the power supply voltage range for SN74LS161ADR? A: SN74LS161ADR operates on a power supply voltage range of 4.75V to 5.25V.

  6. Q: Does SN74LS161ADR have any built-in error detection or correction features? A: No, SN74LS161ADR does not have any built-in error detection or correction features.

  7. Q: Can SN74LS161ADR be used in both synchronous and asynchronous modes? A: No, SN74LS161ADR is designed to operate only in synchronous mode.

  8. Q: What is the maximum propagation delay of SN74LS161ADR? A: The maximum propagation delay of SN74LS161ADR is 30 ns.

  9. Q: Can SN74LS161ADR be used in both rising-edge and falling-edge triggered applications? A: Yes, SN74LS161ADR can be used in both rising-edge and falling-edge triggered applications.

  10. Q: What is the typical power consumption of SN74LS161ADR? A: The typical power consumption of SN74LS161ADR is around 20 mW.

Please note that these answers are general and may vary depending on specific application requirements and conditions.