Texas Instruments
Изображение может быть репрезентативным.
Подробную информацию о продукте см. в характеристиках.
TS3DV421DGVR
Посмотреть детали Таблицы данных

TS3DV421DGVR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power, Bidirectional
  • Package: DGVR (Micro SMD package)
  • Essence: Analog Switch
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 4
  • Voltage Supply Range: 1.65V to 5.5V
  • On-State Resistance: 0.6Ω (typical)
  • Bandwidth: 400MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS3DV421DGVR has a total of 10 pins:

  1. IN1: Input 1
  2. IN2: Input 2
  3. IN3: Input 3
  4. IN4: Input 4
  5. VCC: Positive Power Supply
  6. GND: Ground
  7. EN: Enable Control
  8. COM: Common Terminal
  9. NO: Normally Open Terminal
  10. NC: Normally Closed Terminal

Functional Features

  • Bidirectional signal switching between four channels
  • Low on-state resistance for minimal signal distortion
  • Wide voltage supply range for compatibility with various systems
  • Fast switching speed for high-speed data transmission
  • Low power consumption for energy efficiency
  • ESD protection for enhanced reliability

Advantages and Disadvantages

Advantages: - High-speed switching capability - Low power consumption - Wide voltage supply range - Compact Micro SMD package

Disadvantages: - Limited number of channels (4) - Relatively higher on-state resistance compared to some alternatives

Working Principles

The TS3DV421DGVR is an analog switch that allows bidirectional signal switching between four channels. It operates by controlling the connection between the common terminal (COM) and either the normally open terminal (NO) or the normally closed terminal (NC) using the enable control (EN) input. When EN is high, the switch is turned on, allowing the signal to pass through from the selected input to the output. When EN is low, the switch is turned off, isolating the input from the output.

Detailed Application Field Plans

The TS3DV421DGVR is commonly used in various applications, including:

  1. Audio/Video Systems: Switching between different audio/video sources
  2. Communication Systems: Signal routing and switching in telecommunication devices
  3. Test and Measurement Equipment: Channel selection and signal routing
  4. Data Acquisition Systems: Multiplexing and switching of analog signals
  5. Industrial Control Systems: Signal routing and switching in control panels

Detailed and Complete Alternative Models

  • TS3DV416DGVR: 4-channel analog switch with lower on-state resistance
  • TS3DV425DGVR: 5-channel analog switch with similar characteristics
  • TS3DV431DGVR: 8-channel analog switch with extended channel count

(Note: The above alternative models are provided for reference and may have different specifications and pin configurations. Please refer to their respective datasheets for detailed information.)

This entry provides an overview of the TS3DV421DGVR, a 4-channel bidirectional analog switch. It includes basic information about the product, its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Перечислите 10 распространенных вопросов и ответов, связанных с применением TS3DV421DGVR в технических решениях.

Sure! Here are 10 common questions and answers related to the application of TS3DV421DGVR in technical solutions:

  1. Q: What is TS3DV421DGVR? A: TS3DV421DGVR is a high-speed, low-power quad-channel analog switch designed for use in various technical solutions.

  2. Q: What are the key features of TS3DV421DGVR? A: Some key features include low on-resistance, wide voltage range, low power consumption, and high bandwidth.

  3. Q: In what applications can TS3DV421DGVR be used? A: TS3DV421DGVR can be used in applications such as audio/video signal routing, data acquisition systems, test equipment, and communication systems.

  4. Q: What is the voltage range supported by TS3DV421DGVR? A: TS3DV421DGVR supports a wide voltage range from -5V to +5V, making it suitable for various signal levels.

  5. Q: How many channels does TS3DV421DGVR have? A: TS3DV421DGVR has four independent channels, allowing for multiple signal paths to be controlled simultaneously.

  6. Q: What is the on-resistance of TS3DV421DGVR? A: The on-resistance of TS3DV421DGVR is typically very low, ensuring minimal signal distortion and loss.

  7. Q: Can TS3DV421DGVR handle high-frequency signals? A: Yes, TS3DV421DGVR has a high bandwidth, making it suitable for handling high-frequency signals without significant degradation.

  8. Q: Does TS3DV421DGVR support bidirectional signal flow? A: Yes, TS3DV421DGVR supports bidirectional signal flow, allowing for versatile signal routing in both directions.

  9. Q: What is the power supply voltage required for TS3DV421DGVR? A: TS3DV421DGVR operates with a power supply voltage ranging from 1.65V to 5.5V.

  10. Q: Is TS3DV421DGVR available in different package options? A: Yes, TS3DV421DGVR is available in various package options, including small-outline integrated circuit (SOIC) and wafer chip scale package (WCSP).

Please note that these answers are general and may vary depending on the specific application and requirements.