Category: Integrated Circuit (IC)
Use: Power Management IC
Characteristics: - Low-power voltage supervisor and reset generator - Monitors the power supply voltage level and generates a reset signal when the voltage falls below a specified threshold - Suitable for use in various electronic devices and systems
Package: DPG-14 (Plastic Dual-In-Line Package)
Essence: The UCC3915DPG4 is an integrated circuit that provides voltage supervision and reset generation capabilities, ensuring proper operation of electronic devices by monitoring the power supply voltage.
Packaging/Quantity: The UCC3915DPG4 is typically sold in reels or tubes containing 250 units per package.
The UCC3915DPG4 has a total of 14 pins arranged as follows:
```
| | --| VDD GND |-- Pin 1: Ground (GND) --| RESET OUT |-- Pin 2: Active-Low Reset Output --| THRESHOLD |-- Pin 3: Threshold Voltage Selection Input --| SENSE |-- Pin 4: Voltage Sense Input --| VDD |-- Pin 5: Power Supply Voltage (VDD) --| RESET |-- Pin 6: External Reset Input --| RESET |-- Pin 7: External Reset Input --| RESET |-- Pin 8: External Reset Input --| RESET |-- Pin 9: External Reset Input --| RESET |-- Pin 10: External Reset Input --| RESET |-- Pin 11: External Reset Input --| RESET |-- Pin 12: External Reset Input --| RESET |-- Pin 13: External Reset Input --| RESET |-- Pin 14: External Reset Input |___________| ```
Advantages: - Reliable Power Supply Monitoring: Ensures proper operation of electronic devices by monitoring the power supply voltage. - Flexible Threshold Selection: Multiple threshold voltage options allow customization based on specific voltage requirements. - Low Power Consumption: Operates with a low quiescent current, reducing overall power consumption.
Disadvantages: - Limited Reset Output Options: The UCC3915DPG4 provides only an active-low reset output, which may not be suitable for all applications requiring a different reset polarity.
The UCC3915DPG4 works by continuously monitoring the power supply voltage through the SENSE pin. The threshold voltage is set using the THRESHOLD pin, which allows for customization based on specific voltage requirements. When the power supply voltage falls below the selected threshold, the UCC3915DPG4 generates an active-low reset signal at the RESET OUT pin, initiating a system reset.
The UCC3915DPG4 can be used in various electronic devices and systems that require reliable power supply monitoring and reset generation. Some potential application fields include:
Sure! Here are 10 common questions and answers related to the application of UCC3915DPG4 in technical solutions:
Q: What is UCC3915DPG4? A: UCC3915DPG4 is a high-voltage battery management IC designed for use in technical solutions, specifically for monitoring and protecting battery packs.
Q: What are the key features of UCC3915DPG4? A: Some key features of UCC3915DPG4 include overvoltage protection, undervoltage protection, cell balancing, temperature monitoring, and fault detection.
Q: How does UCC3915DPG4 provide overvoltage protection? A: UCC3915DPG4 monitors the voltage of each individual cell in a battery pack and triggers an alarm or shuts down the system if any cell's voltage exceeds a predefined threshold.
Q: Can UCC3915DPG4 handle multiple battery chemistries? A: Yes, UCC3915DPG4 is compatible with various battery chemistries such as lithium-ion, lithium-polymer, and lead-acid batteries.
Q: Does UCC3915DPG4 support cell balancing? A: Yes, UCC3915DPG4 has built-in cell balancing functionality that equalizes the charge across cells in a battery pack, ensuring optimal performance and longevity.
Q: How does UCC3915DPG4 monitor temperature? A: UCC3915DPG4 has integrated temperature sensors that measure the temperature of each cell, allowing for thermal management and protection against overheating.
Q: Can UCC3915DPG4 detect faults in the battery pack? A: Yes, UCC3915DPG4 can detect faults such as short circuits, open circuits, and overcurrent conditions, triggering appropriate actions to protect the battery pack.
Q: What is the input voltage range supported by UCC3915DPG4? A: UCC3915DPG4 supports an input voltage range of 6V to 65V, making it suitable for a wide range of applications.
Q: Is UCC3915DPG4 programmable? A: No, UCC3915DPG4 is not programmable. It operates based on its internal settings and predefined thresholds.
Q: What are some typical applications of UCC3915DPG4? A: UCC3915DPG4 is commonly used in electric vehicles, energy storage systems, uninterruptible power supplies (UPS), and other high-voltage battery-powered devices.
Please note that these answers are general and may vary depending on specific use cases and requirements.